Dual-channel waveguide rotary joints

Telecoms, Datacoms, Wireless, IoT

Microwave semiconductor & tube suppliers

Radio system suppliers

RF module & subsystem suppliers

Telephony IC suppliers

Wireless system IC/module suppliers

printer friendly version

19 January 2011 Telecoms, Datacoms, Wireless, IoT

Link Microtek has expanded its portfolio of waveguide products with the introduction of a range of dual-channel rotary joints that offer low-loss performance and high power capability over the frequency range 1,5 to 40 GHz.

The AM-RJ-D series rotary joints can be configured with two waveguide channels or with one waveguide channel and one coaxial channel. The waveguide channels, which would generally be used for high-power transmissions, are available in waveguide sizes from WR28 to WR284, while the coaxial low-power receiver channels can be specified with frequencies from DC to 40 GHz. Particularly suitable for use in satellite communications or radar applications, the rotary joints typically have a maximum insertion loss of 0,2-0,3 dB, a high isolation of 60 dB between the two channels, and a power capability of up to 500 W.

Any standard waveguide flange can be incorporated in the design to suit customers’ specific requirements, and an extensive choice of coaxial connectors is offered, including SMA, N type and TNC. In addition, optional slip-ring assemblies are available for interfacing to external equipment. The AM-RJ-D devices are fabricated as standard from lightweight Alochromed aluminium with a black satin paint finish. They can also be supplied in brass or other materials to special order.

For more information visit www.linkmicrotekeng.com

Share this article:

SIMCom’s A7673x series
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat.1 bis module based on the ASR1606 chipset, that supports wireless communication modes of LTE-FDD, with a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps.

Read more...

Accelerating the commercialisation of the 5G IoT markets
Altron Arrow Editor's Choice Telecoms, Datacoms, Wireless, IoT
Fibocom unveils Non-Terrestrial Networks (NTN) module MA510-GL, enabling satellite and cellular connectivity to IoT applications.

Read more...

Long-range connectivity module
Avnet Silica Telecoms, Datacoms, Wireless, IoT
Digi XBee XR 868 RF Modules support the deployment of long-range connectivity applications, and support point-to-point and mesh networking protocols.

Read more...

4G LTE-M/NB-IoT connectivity reference design
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Developed around the industry-leading Nordic nRF9160 module, the platform comes complete with a newly-developed LTE antenna, ATRIA, which is pre-certified to operate over the full LTE-M and NB-IoT bands.

Read more...

Antennas to meet all connectivity requirements
Electrocomp Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.

Read more...

Introducing SIMCom’s new A7673X series
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat 1 bis module that supports LTE-FDD, with a maximum downlink rate of 10 Mbps and an uplink rate of 5 Mbps.

Read more...

18 W monolithic microwave amplifier
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
The CHA8612-QDB is a two stage, high-power amplifier operating between 7,9 and 11 GHz. The monolithic microwave amplifier can typically provide 18 W of saturated output power and 40% of power-added efficiency.

Read more...

Categories

Telecoms, Datacoms, Wireless, IoT

Dual-channel waveguide rotary joints

Further reading:

Publications by Technews