C&K Components has upgraded its KMT0 series of miniature tactile switches to provide IP68 sealing. The switches are completely sealed and stay fully functional under water for a minimum of 5 hours at a depth of 2 metres. In addition, the KMT0 series is fully resistant to the most stringent conformal polymer coatings, including one of the smallest particle chemical vapours, parylene, which is used for coating printed circuit boards (PCBs) and medical devices.
Featuring a lifespan of more than 300 000 electrical and mechanical cycles, the KMT0 series tactile switch’s low profile makes it a viable solution for handheld and portable electronic device applications that require a small footprint, while the IP sealing provides protection against perspiration and water in portable devices.
The RoHS-compliant and halogen-free ultra-miniature KMT0 switches feature a footprint of 3,0 x 2,6 mm with a height of 0,63 or 0,65 mm. The SPST (single pole single throw) normally-open switches are constructed with silver plating and are available with four operating forces: 1,0 N, 1,6 N, 2,3 N and 3,4 N. Maximum overload is 30 N. Actuator height is only 0,2 mm, and the integrated actuator allows for simpler button design while yielding a tactile ratio minimum of 30%, providing sharp feedback (low tactile ratio of 10% is available for hearing aids and headsets).
The switches feature a maximum power rating of 0,5 VA and a minimum/maximum voltage of 20 mV – 32 V d.c. with a minimum/maximum current rating of 1 mA–50 mA. The operating temperature ranges from -40°C to +85°C.
Adaptive optics’ power solution Altron Arrow
Opto-Electronics
Vicor power-dense adaptive optical modules enable colossal telescopes to look into the past for deep space discoveries.
Read more...Wide input voltage buck-boost converter Altron Arrow
Power Electronics / Power Management
The MAX77859 from Analog Devices is a high-efficiency, high-performance buck-boost converter targeted for systems requiring a wide input voltage range of between 2,5 and 22 V.
Read more...High-performance processor for edge-AI Altron Arrow
DSP, Micros & Memory
The STM32MP23 microprocessor from STMicroelectronics is the latest addition to the STM32MP2 series, designed to meet the demands of industrial, IoT, and edge AI applications.
Read more...6 GHz power amplifier Altron Arrow
Telecoms, Datacoms, Wireless, IoT
Analog Devices’ ADPA1116 is a 0,3 to 6 GHz GaN-based power amplifier with a saturated output power (POUT) of 39,5 dBm.
Read more...STM releases innovative GNSS receiver Altron Arrow
Telecoms, Datacoms, Wireless, IoT
STMicroelectronics recently introduced the Teseo VI family of global navigation satellite system receivers aimed at high-volume precise positioning use cases.
Read more...Integrated STM32WBA6 wireless microcontrollers Altron Arrow
DSP, Micros & Memory
Cost-efficient and highly integrated embedded controllers for emerging 2,4 GHz wireless applications in smart home, health, factory, and agriculture.
Read more...Ultra-low-power MCU with FPU Arm Cortex-M33 Altron Arrow
DSP, Micros & Memory
STMicroelectronics has expanded its STM32 ultra-low-power family with the launch of the STM32U3 for cost-sensitive applications in industrial, medical, and consumer electronics devices.
Read more...Compact and powerful Bluetooth module Altron Arrow
Telecoms, Datacoms, Wireless, IoT
u-blox has introduced its ANNA-B5, a compact, powerful and secure Bluetooth LE module optimised for IoT applications.