Telecoms, Datacoms, Wireless, IoT


LGA format 3G module with GPS

7 March 2012 Telecoms, Datacoms, Wireless, IoT

Option Wireless Technology has released its latest high-speed, embedded LGA product – the GTM601W. This embedded broadband/3G module is provided in a 70-pin LGA form factor, catering for applications utilising high-volume, automated assembly.

The device provides 14,4 Mbps HSDPA connectivity for downlink and 5,76 Mbps HSUPA speed for uplink. Data support is also provided for 2G infrastructure, allowing the device to operate seamlessly on all data networks.

Also integrated are embedded GPS capabilities. With a time to first fix of 32 seconds at -130 dBm (50 seconds for a weaker signal) and a tracking sensitivity of -154 dBm typical, as well as concurrent GPS/Glonass operation, the GPS is not simply an afterthought. With enhanced voice features, the GTM601W is also a suitable fit for voice applications as well. In terms of interface, the module has a 4 x 4 wire interface for UART/UIM/SPI/PCM/NFC/I²C and I²S communications.

As a ready-to-embed broadband product, the GTM601W has certified support for Windows XP 32 Bit,Windows Vista 32/64 Bit, Windows 7 32/64 Bit (Mobile Broadband API, Sensor and Location API), Windows Mobile CE/Mobile (RIL, GPS driver), Linux (kernel version 2.6.26 and higher), Android (RIL, audio HAL, GPS HAL), Google Chrome and MeeGo.

For more information contact Chris Viveiros, Otto Wireless Solutions, +27 (0)11 791 1033, wireless@otto.co.za, www.otto.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Wireless connectivity expanded
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Espressif Systems has introduced two new members of its ESP32 wireless SoC family: the ESP32-E22, the company’s first Wi-Fi 6E connectivity chip, and the ESP32-H21, an ultra-low-power Bluetooth LE microcontroller aimed at coin-cell and battery-powered devices.

Read more...
Integrated X-band radar front-end module
RF Design Telecoms, Datacoms, Wireless, IoT
Qorvo has introduced an X-band radar front-end solution that enables defence system designers to achieve higher performance without increasing size, weight or prime power.

Read more...
Introducing Aurata
CST Electronics Telecoms, Datacoms, Wireless, IoT
Antenova has launched Aurata SR4L112: a compact, high efficiency embedded 4G/LTE antenna engineered for long, narrow PCB designs.

Read more...
Multi-constellation GNSS module in a legacy-compatible footprint
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Telit Cinterion has announced the SE869eK2L, a single-frequency L1 GNSS module designed to help device manufacturers upgrade legacy positioning designs with improved performance and cost efficiency, while preserving design continuity.

Read more...
Quectel expands 5G portfolio
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Quectel expands 5G portfolio with new Qualcomm- and UNISOC-based modules.

Read more...
Compact RTK design: More than just the receiver
iCorp Technologies Editor's Choice Telecoms, Datacoms, Wireless, IoT
In practice, engineers building compact RTK products keep discovering the same thing: the hardest component in the system is no longer the receiver. It is the antenna.

Read more...
Microchip advances Space-Grade timing performance
ASIC Design Services Telecoms, Datacoms, Wireless, IoT
Microchip Technology has expanded its atomic clock portfolio with the radiation-tolerant Space CSAC-SA65, a Chip Scale Atomic Clock designed to deliver precise timing for space systems.

Read more...
Channel emulator for 6 G and Wi-Fi 7/8
Concilium Technologies Telecoms, Datacoms, Wireless, IoT
With 400 MHz instantaneous bandwidth and support for carrier frequencies up to 23,6 GHz, Vertex 6.0 is the industry’s first channel emulator designed for next generation 6 G and Wi-Fi 7/8 testing.

Read more...
Secure, low-power Bluetooth LE SoC
NuVision Electronics Telecoms, Datacoms, Wireless, IoT
Silicon Labs unveils BG2B, its lowest-power Bluetooth LE SoC with industry-leading power efficiency, security, and integration.

Read more...
High-isolation RF switch optimised for broadband cable
Telecoms, Datacoms, Wireless, IoT
pSemi Corporation has announced the PE42727 UltraCMOS SPDT RF Switch, a high-isolation solution optimised for next generation broadband cable applications.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved