Telecoms, Datacoms, Wireless, IoT


Wideband PLLs with integrated VCOs

16 May 2012 Telecoms, Datacoms, Wireless, IoT

Hittite has launched two new SMT packaged wideband PLLs (phase locked loops) with integrated VCOs - the HMC833LP6GE and the HMC834LP6GE. The devices are well suited for a wide range of applications including high-performance cellular/4G WiMax infrastructure, repeaters and femtocells, communications test equipment, CATV equipment, very high data rate radios, phased array and DDS replacement applications.

The HMC833LP6GE is a low-noise, wideband, fractional-N PLL that features an integrated VCO (voltage controlled oscillator) with a fundamental frequency of 1500 MHz–3000 MHz, and an integrated VCO output divider (divide by 1/2/4/6.../60/62) and doubler. These features allow it to generate frequencies from 25 MHz to 6000 MHz.

The HMC834LP6GE features an integrated VCO with a fundamental frequency of 2800 MHz–4200 MHz, and an integrated VCO output divider (divide by 1/2/4/6.../60/62) and doubler, that together allow it to generate frequencies from 45 MHz to 1050 MHz, from 1400 MHz to 2100 MHz, from 2800 MHz to 4200 MHz, and from 5600 MHz to 8400 MHz.

The devices feature excellent phase noise and spurious performance across all frequencies, which minimises blocker effects and improves receiver sensitivity and transmitter spectral purity. The noise floor of less than -170 dBc/Hz makes them ideal for a variety of applications such as LO for RF mixers, a clock source for high-frequency data-converters, or a tuneable reference source for ultra-low spurious applications.

The HMC833LP6GE and the HMC834LP6GE also feature 9 dB of programmable RF output power control (3 dB steps) and an output mute function with over 40 dB of isolation across the entire operating frequency range. Both devices feature an ‘exact frequency mode’ that enables users to generate output frequencies with 0 Hz frequency error. An integrated phase detector feature and a delta-sigma modulator, which is capable of operating up to 100 MHz, enable wider loop-bandwidths with excellent spectral performance.

For more information contact Andrew Hutton, RF Design, +27 (0)21 555 8400, sales@rfdesign.co.za, www.rfdesign.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Macom targets broadband radar with time delay MMIC
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
Macom’s MADU FR1012 is a GaAs MMIC 1-bit true time delay device covering 4 GHz to 12 GHz, designed for broadband microwave systems where beam accuracy and signal integrity are critical.

Read more...
Compact analogue phase shifter
RF Design Telecoms, Datacoms, Wireless, IoT
The Mini-Circuits JSPHS-150+ is a compact analogue voltage-controlled phase shifter designed for narrowband RF applications between 100 and 150 MHz.

Read more...
Wireless connectivity expanded
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Espressif Systems has introduced two new members of its ESP32 wireless SoC family: the ESP32-E22, the company’s first Wi-Fi 6E connectivity chip, and the ESP32-H21, an ultra-low-power Bluetooth LE microcontroller aimed at coin-cell and battery-powered devices.

Read more...
Integrated X-band radar front-end module
RF Design Telecoms, Datacoms, Wireless, IoT
Qorvo has introduced an X-band radar front-end solution that enables defence system designers to achieve higher performance without increasing size, weight or prime power.

Read more...
Introducing Aurata
CST Electronics Telecoms, Datacoms, Wireless, IoT
Antenova has launched Aurata SR4L112: a compact, high efficiency embedded 4G/LTE antenna engineered for long, narrow PCB designs.

Read more...
Multi-constellation GNSS module in a legacy-compatible footprint
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Telit Cinterion has announced the SE869eK2L, a single-frequency L1 GNSS module designed to help device manufacturers upgrade legacy positioning designs with improved performance and cost efficiency, while preserving design continuity.

Read more...
Quectel expands 5G portfolio
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Quectel expands 5G portfolio with new Qualcomm- and UNISOC-based modules.

Read more...
Surface mount power amplifier for high-power applications
RF Design Power Electronics / Power Management
The GNA-63-5W+, from Mini-Circuits, is a GaN MMIC Power Amplifier (PA) designed for demanding RF applications requiring high efficiency, excellent linearity, and a compact footprint.

Read more...
Compact RTK design: More than just the receiver
iCorp Technologies Editor's Choice Telecoms, Datacoms, Wireless, IoT
In practice, engineers building compact RTK products keep discovering the same thing: the hardest component in the system is no longer the receiver. It is the antenna.

Read more...
Microchip advances Space-Grade timing performance
ASIC Design Services Telecoms, Datacoms, Wireless, IoT
Microchip Technology has expanded its atomic clock portfolio with the radiation-tolerant Space CSAC-SA65, a Chip Scale Atomic Clock designed to deliver precise timing for space systems.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved