New from Linear Technology is the LTM8026, a 36 V input, 5 A step-down μModule regulator with an adjustable and ±10% accurate current limit. The current limit enables designers to set the maximum amount of power drawn from the supply, preventing input voltage droop caused by over-current conditions.
When multiple LTM8026s are configured with the outputs tied together, each converter can be programmed with a unique maximum current limit to meet its specific input supply limitations for greater output power, a technique known as asymmetric power sharing.
In contrast, common regulators must current share, a feature where each input supply contributes equally to the load, which is restricted by the least powerful input rail. Applications for the LTM8026 include point-of-load regulation in systems with 24 V and 12 V supplies such as VXI bus, for automotive, medical and industrial end-markets.
Like other μModule regulators, the device includes the DC/DC controller, power switches, power inductor, compensation and a modest amount of input and output capacitance in a surface mount package.
The current limit is adjustable by applying a voltage or resistor divider and can be automatically decreased with rising junction or ambient temperature using a thermistor to prevent the regulator or load from overheating.
The LTM8026 operates from an input voltage between 6 V and 36 V, and regulates an output voltage from 1,2 V to 24 V set by a single resistor. In a 12 V to 3,3 V output application, the IC achieves an operating efficiency of 89% at 2 A.
For noise-sensitive applications, the regulator can be synchronised to an external clock frequency in the range of 100 kHz to 1 MHz. Additional features include externally adjustable soft start, adjustable switching frequency and thermal shutdown.
The device is packaged in a thermally efficient 11,25 x 15 x 2,82 mm LGA package. Two temperature grades, E and I, covering the -40°C to +125°C temperature range, are available.
Rugged railway-grade DC-DC power modules iCorp Technologies
Power Electronics / Power Management
iCorp Technologies has introduced the AIPUPOWER ZCD100 and ZCD150 Series, a family of rugged DC-DC converters designed to meet the demanding electrical and environmental requirements of railway and transportation systems.
Read more...NXP has expanded its MCX A Series Altron Arrow
AI & ML
NXP has significantly expanded its MCX A Series of Arm Cortex-M33 microcontrollers, doubling the portfolio with six new families aimed at industrial and IoT edge applications.
Read more...Four-quadrant regenerative grid simulator Conical Technologies
Power Electronics / Power Management
The IT7900EP series high-performance regenerative grid simulator from ITECH is a full four-quadrant AC grid simulator capable of both sourcing and sinking power.
Read more...90 W PSU with 150% boost capability Brabek
Power Electronics / Power Management
RECOM’s cost effective REFIN2U-S90/CL DIN rail AC/DC boasts a 90 W rating with a boost capability of 150% for 4,5 seconds to allow for surge loads.
Read more...Exploring Bluetooth Channel Sounding Altron Arrow
Telecoms, Datacoms, Wireless, IoT
NXP has enabled BCS on the MCX W72 multi-protocol wireless MCU, which supports Bluetooth Low Energy 6.0, Thread, Zigbee, and Matter.
Read more...Standalone USB PD controller Future Electronics
Power Electronics / Power Management
The STUSB4531 from STMicroelectronics is a standalone USB Power Delivery sink controller designed to streamline the implementation of USB-C power negotiation in sink devices without requiring a full software stack on a host microcontroller.
Read more...Dual-band Wi-Fi 6 companion module Altron Arrow
Telecoms, Datacoms, Wireless, IoT
The SimpleLink Wi-Fi CC33xx family of devices from Texas Instruments are dual-band Wi-Fi 6 companion modules enabling engineers to connect more applications with confidence.
Read more...MIL-Spec DC-DC power converters Vepac Electronics
Power Electronics / Power Management
PowerGood has introduced a range of 15 W to 600 W military DC-DC power converters engineered for mission critical defence applications.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version