20 February 2013Manufacturing / Production Technology, Hardware & Services
Fuji has released the NXTP M35 stencil printer, which expands the supported panel size of this printer series to 350 x 300 mm.
The latest addition to the lineup has all the features of the previously released NXTP M25, but with a wider body for handling medium sized panels.
Available in both single and double conveyor specifications, the machine offers enhanced performance for the production of automotive and tablet panels. Fuji has used its manufacturing experience and robot technology to ensure that this printer achieves high real throughput while maintaining excellent print accuracy.
High speed production is not just about the printing operation, changeover work is also a vital factor. The conveyor arrangement and one-sided operation of the NXTP series means that changeover work for one lane can be performed without interrupting production at the other lane. Also, with job changeover possible simply by scanning a barcode, getting ready for the next production job is simplified.
Features that ensure print quality high enough for the latest manufacturing demands include vacuum for holding down the stencil during printing and snap-off, an easily adjustable squeegee angle, a low-impact clamping mechanism, and solder roll control to prevent air bubbles. Alignment accuracy is ±10 μm, which is suitable for the production of parts as small as 0402 mm.
Various line configurations are possible with the NXTP. As well as a single printer line, printers can be arranged next to each other or even back-to-back in combination with Fuji’s All-in-one AIMEX IIS mounter to create a dual-lane line capable of independent production in each lane.
The NXTP series features a touch-screen operation panel which makes setup and operation easy. Jobs and settings can also be specified in the same Fuji Flexa software that is used to manage other Fuji machines. Furthermore, there is a function for verifying that the correct materials are being used at the machine, as well as an automatic solder supply unit and cleaning mechanism that delivers cleaning agent to the necessary area only.
World-first 016008 mm component placement
Manufacturing / Production Technology, Hardware & Services
Fuji has achieved the world’s first placement of 016008 mm (0,16 x 0,08 mm or 006 x 003 inches) size components on printed circuit boards with its SMT pick and place machine, NXTR.
Read more...Lifecycle and obsolescence: Protecting electronics through process Production Logix
Manufacturing / Production Technology, Hardware & Services
At Production Logix, we believe longevity is not accidental. It is engineered through early visibility, structured response, and disciplined execution, in partnership with our OEM customers.
Read more...Maximising squeegee quality and durability Testerion
Manufacturing / Production Technology, Hardware & Services
Transition Automation has announced two new product advancements designed to improve SMT printing performance and extend squeegee life: laser-enhanced Permalex bonding and integrated edge protectors.
Read more...NeoDen ND2 PCB screen printer ZETECH ONE
Manufacturing / Production Technology, Hardware & Services
The NeoDen ND2 PCB screen printing machine is a fully automatic stencil printer designed to deliver precise and consistent solder paste application in modern SMT production environments.
Read more...Understanding the BGA rework process Techmet
Manufacturing / Production Technology, Hardware & Services
BGA rework is a highly technical process that involves removing the faulty component, preparing the circuit board, and installing a new or repaired device, while maintaining the integrity of the printed circuit board.
Read more...Flexible three-process reflow soldering system Truth Electronic Manufacturing
Manufacturing / Production Technology, Hardware & Services
By combining multiple soldering technologies within a single system, the Vision TripleX system enables manufacturers to adapt easily to different assembly requirements, board designs, and production volumes.
Read more...Inline vapour phase soldering for high-volume production MyKay Tronics
Manufacturing / Production Technology, Hardware & Services
The VP2200-100 vacuum inline vapour phase soldering system from ASSCON is designed for fully automated, high-volume electronics manufacturing where process consistency and solder joint quality are critical.
Read more...Global electronics solutions since 1964 IMP Electronics Solutions
Manufacturing / Production Technology, Hardware & Services
Over more than six decades, IMP Electronics Solutions has built a reputation for technical expertise, reliable supply chains, and strong partnerships with both customers and manufacturing partners.
Read more...Driving excellence in electronics manufacturing Jemstech
Editor's Choice Manufacturing / Production Technology, Hardware & Services
Jemstech’s reputation for disciplined execution and client-focused service has earned it strong loyalty from companies operating in demanding industries.
Read more...When do you need Nitrogen in reflow? Truth Electronic Manufacturing
Manufacturing / Production Technology, Hardware & Services
Nitrogen in reflow soldering is often seen as a performance enhancer, offering improved wetting, shinier joints, and fewer defects. But it is not always necessary.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version