Telecoms, Datacoms, Wireless, IoT


Combo antennas for mounting inside or outside vehicles

31 January 2017 Telecoms, Datacoms, Wireless, IoT

The Guardian MA931 from Taoglas is a compact 6-in-1 antenna for rugged 4G vehicle router applications. Ideal for use with the dualLTE-advanced vehicle networking platforms MG90 and MP70 from Sierra Wireless, the antenna can be used to deploy plug-and-play solutions for in-vehicle applications.

This panel antenna, designed for IoT gateway and router devices, is low in profile and can be mounted on a wall or other surface via adhesive. It is a heavy-duty, fully IP67 waterproof resistant external M2M antenna for use by RF professionals in IoT gateway and routers, HD video streaming, transportation and remote monitoring applications.

The antenna delivers powerful MIMO technology for worldwide 4G LTE bands at 698 – 960 MHz, 1710 – 2170 MHz, 2490 – 2690 MHz and 3300 – 3600 MHz; dual-band 2,4/5,8 GHz Wi-Fi, plus GPS/GLONASS/BeiDou for location accuracy. It enables designers to install only one antenna to cover all of these technologies.

Taoglas has taken care to ensure high isolation among these antennas to prevent self-interference, while low-loss cables are used to keep efficiency high over long cable lengths. The GPS/GLONASS/BeiDou active antenna has been carefully designed for excellent performance across all GNSS bands, leading to higher location accuracy and stability of tracking in urban environments.

With a housing dimension of 146 x 134 x 20 mm, the Guardian MA931 comes with a 3M foam adhesive and can be mounted internally or externally on a vehicle. It comes with 1 metre, low-loss KSR-200P coaxial cables for the LTE and Wi-Fi antennas, and the RG174 coaxial cable for the GNSS antenna as standard. Customised cables and connector versions are also available.

For more information contact Andrew Hutton, RF Design, +27 (0)21 555 8400, andrew@rfdesign.co.za, www.rfdesign.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Macom targets broadband radar with time delay MMIC
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
Macom’s MADU FR1012 is a GaAs MMIC 1-bit true time delay device covering 4 GHz to 12 GHz, designed for broadband microwave systems where beam accuracy and signal integrity are critical.

Read more...
Compact analogue phase shifter
RF Design Telecoms, Datacoms, Wireless, IoT
The Mini-Circuits JSPHS-150+ is a compact analogue voltage-controlled phase shifter designed for narrowband RF applications between 100 and 150 MHz.

Read more...
Wireless connectivity expanded
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Espressif Systems has introduced two new members of its ESP32 wireless SoC family: the ESP32-E22, the company’s first Wi-Fi 6E connectivity chip, and the ESP32-H21, an ultra-low-power Bluetooth LE microcontroller aimed at coin-cell and battery-powered devices.

Read more...
Integrated X-band radar front-end module
RF Design Telecoms, Datacoms, Wireless, IoT
Qorvo has introduced an X-band radar front-end solution that enables defence system designers to achieve higher performance without increasing size, weight or prime power.

Read more...
Introducing Aurata
CST Electronics Telecoms, Datacoms, Wireless, IoT
Antenova has launched Aurata SR4L112: a compact, high efficiency embedded 4G/LTE antenna engineered for long, narrow PCB designs.

Read more...
Multi-constellation GNSS module in a legacy-compatible footprint
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Telit Cinterion has announced the SE869eK2L, a single-frequency L1 GNSS module designed to help device manufacturers upgrade legacy positioning designs with improved performance and cost efficiency, while preserving design continuity.

Read more...
Quectel expands 5G portfolio
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Quectel expands 5G portfolio with new Qualcomm- and UNISOC-based modules.

Read more...
Surface mount power amplifier for high-power applications
RF Design Power Electronics / Power Management
The GNA-63-5W+, from Mini-Circuits, is a GaN MMIC Power Amplifier (PA) designed for demanding RF applications requiring high efficiency, excellent linearity, and a compact footprint.

Read more...
Compact RTK design: More than just the receiver
iCorp Technologies Editor's Choice Telecoms, Datacoms, Wireless, IoT
In practice, engineers building compact RTK products keep discovering the same thing: the hardest component in the system is no longer the receiver. It is the antenna.

Read more...
Microchip advances Space-Grade timing performance
ASIC Design Services Telecoms, Datacoms, Wireless, IoT
Microchip Technology has expanded its atomic clock portfolio with the radiation-tolerant Space CSAC-SA65, a Chip Scale Atomic Clock designed to deliver precise timing for space systems.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved