UCT team to build solar powered house
10 October 2018
Power Electronics / Power Management
Solar Decathlon challenges teams to design and build a ‘green’ house of between 55 and 110 square metres, powered by only solar energy and equipped with technically advanced building and energy technologies. This should be done using local ingenuity, craftsmanship and materials.
UCT senior lecturers Mike Louw and Kevin Fellingham (School of Architecture, Planning & Geomatics), and Dr Dyllon Randall (Department of Civil Engineering), have been brought on board Team Mahali – based at Stellenbosch University’s Sustainability Institute – for their design skills and knowledge of innovative waste-water systems, respectively.
Louw commented: “Part of the design theme is inspired by the central place of the tree in African culture: a place of meeting, education and important community decision-making. The house has been designed for conditions in Morocco but also for other African contexts.”
Locally available and recycled materials have been used as far as possible.
The latter area of the structure is being led by former and current students in the Faculty of Engineering & the Built Environment – Gordon Rae, Muven Naidoo and Elouise Pretorius, with input from Randall.
Rae, Naidoo and Pretorius are implementing a wide range of sustainable water practice and technology into the house, ranging from composting toilets and grey-water systems to advanced water management and monitoring, as well as rainwater harvesting.
The house will be built in Stellenbosch, then dismantled and shipped to Morocco for reassembly on the test sites in Mohammed VI Green City in Benguerir. During the final phase of the competition, the house will be open to the public.
“We’re merging very high-tech digital design manufacturing with traditional crafting in the making of an identity for the house,” Louw explained. The design phase of the project is due mid-November, after which the team moves on to completing construction documentation.
Although Team Mahali has $50 000 (just over R700 000) in seed funding from the Moroccan government, they still need to raise R3 million and are looking for funders and donations of furniture and energy-efficient household appliances from retailers.
This project is investigating the potential for upskilling and job creation on the building side, using people outside academia. For example, local craftswomen will be employed to supply a large proportion of the building’s components. Two members of Team Mahali recently cycled 1000 km across Morocco to raise funds. They have also launched a crowd-funding campaign.
For more information contact Aamirah Sonday, University of Cape Town, +27 21 650 5427, [email protected], www.uct.ac.za
Further reading:
Powering the IoT
Uniross Batteries
Power Electronics / Power Management
Choosing the right battery is not simply a technical detail, but a defining factor in the longevity and cost-effectiveness of any IoT deployment.
Read more...
The move to DC infrastructure
IOT Electronics
Power Electronics / Power Management
The shift toward direct current infrastructure in data centres is accelerating as operators pursue higher efficiency, improved reliability, and stronger alignment with renewable energy goals.
Read more...
Power inductor for automotive applications
Würth Elektronik eiSos
Power Electronics / Power Management
The WE-MXGA inductor features RDC values up to 25% lower and a saturation current up to 47% higher compared to other components currently available on the market.
Read more...
High-performance DC-DC converter
Conical Technologies
Power Electronics / Power Management
With a wide 9 - 40 V DC input range, the Claf Power DWHB400-F24xxN series is a high-performance DC-DC converter family ideally suited for 12 V and 24 V battery-based systems including vehicles, off-grid installations, and distributed power architectures.
Read more...
DC-DC converters for next-generation IoT
iCorp Technologies
Power Electronics / Power Management
AIPUPOWER’s K78XXJT-500R3 and K78XXJT-500R3-LB give designers a compact, high-efficiency power option for battery-powered and space-constrained systems, combining up to 96% efficiency with no-load input current as low as 0,2 mA.
Read more...
240 W in compact form factor
Brabek
Power Electronics / Power Management
The cost-effective and reliable RECOM RACPRO1-S240E DIN-rail mount AC-DC series is only 125 x 139 mm and 39 mm wide, yet provides 240 W output.
Read more...
You cannot manage what you cannot measure
Power Electronics / Power Management
South African sites are generating solar energy. Most still have no idea what is consuming it… or when, or why. Intelligent load management hardware is changing that.
Read more...
Scalable and intelligent power solution
Power Electronics / Power Management
Designed for Africa’s rapidly evolving energy landscape, Bluetti’s ES125 offers a scalable, intelligent power solution that delivers reliable and cost-efficient electricity for uninterrupted operations.
Read more...
Simulating grid abnormalities
Conical Technologies
Power Electronics / Power Management
Simulating grid abnormalities has become an essential part of validating systems such as inverters, UPS units, photovoltaic inverters, and EV charging infrastructure.
Read more...
Evaluation board for STPMIC25 PMIC
Power Electronics / Power Management
The STEVAL-PMIC25V1 is a power management IC evaluation board for the highly integrated STPMIC25, which is designed to manage the power requirements of the core, memory, and interfaces of the STM32MP2x series MPU.
Read more...