The LORIX One industrial outdoor IP65 LoRa gateway, made by Wifx Sàrl, features high reliability as well as ease of deployment. Despite being an outdoor device, its quality construction means it is delivered with a two year warranty.
The device itself looks like a simple extension of the 868 MHz antenna; one end screws into a compatible 868 MHz antenna (a variety of which are available from local distributor, Otto Wireless Solutions). At the base of the device is a cavity which is accessed by screwing off an end-cap. Within this cavity is the 10/100 Mbps Ethernet port, which also caters for passive Power-over-Ethernet at 24 V d.c. The cavity also contains an SD-card slot, allowing the user to extend the internal memory of the device, as well as a USB port which caters for device configuration as well as managing / updating the gateway manually.
In terms of specs, the LORIX One features an ARM Cortex-A5 600 MHz processor, with 128 MB of DDR 200 MHz memory, as well as 256 MB of Flash memory. It runs on a Linux Yocto 4.4 operating system and is prebuilt to support SSH server, Python, the LORIOT cloud app, the Things Network cloud app, and includes a Semtech packet forwarder.
The RF side of the device is based on the SX1301 SPI gateway chip, with 8 channels and 49 demodulators operating at 868 MHz. The receiver sensitivity is -140 dBm (LoRa) and -110 dBm (FSK), with a transmission power of 27 dBm.
In order to deploy a full Internet-capable gateway, the LORIX One is compatible with Otto Wireless Solutions’ range of industrial wireless routers from Wlink. By connecting the LORIX One and a Wlink router, an LTE/HSPA-capable gateway is created, allowing the user to communicate with nodes/sensors in the field, and backhaul the data to their server environment.
Full sensor to cloud solution CST Electronics
Telecoms, Datacoms, Wireless, IoT
NeoCortec has demonstrated the seamless and rapid development of full sensor-to-cloud solutions using NeoMesh Click boards from MikroE and the IoTConnect cloud solution from Avnet.
Read more...Long-range Wi-Fi HaLow module TRX Electronics
Telecoms, Datacoms, Wireless, IoT
One of Mouser’s newest products is the Morse Micro MM6108-MF08651-US Wi-Fi HaLow Module, which adheres to the IEEE 802.11ah standard.
Read more...Quectel launches 3GPP NTN comms module Quectel Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has announced the Quectel BG95-S5 3GPP non-terrestrial network (NTN) satellite communication module.
Read more...SIMCom’s A7673x series Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat.1 bis module based on the ASR1606 chipset, that supports wireless communication modes of LTE-FDD, with a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps.
Read more...Long-range connectivity module Avnet Silica
Telecoms, Datacoms, Wireless, IoT
Digi XBee XR 868 RF Modules support the deployment of long-range connectivity applications, and support point-to-point and mesh networking protocols.
Read more...4G LTE-M/NB-IoT connectivity reference design iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Developed around the industry-leading Nordic nRF9160 module, the platform comes complete with a newly-developed LTE antenna, ATRIA, which is pre-certified to operate over the full LTE-M and NB-IoT bands.
Read more...Antennas to meet all connectivity requirements Electrocomp
Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.
Read more...Introducing SIMCom’s new A7673X series Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat 1 bis module that supports LTE-FDD, with a maximum downlink rate of 10 Mbps and an uplink rate of 5 Mbps.
Read more...18 W monolithic microwave amplifier RFiber Solutions
Telecoms, Datacoms, Wireless, IoT
The CHA8612-QDB is a two stage, high-power amplifier operating between 7,9 and 11 GHz. The monolithic microwave amplifier can typically provide 18 W of saturated output power and 40% of power-added efficiency.
printer friendly version