Telecoms, Datacoms, Wireless, IoT


VDSL demo board

5 June 2002 Telecoms, Datacoms, Wireless, IoT

Infineon's VDSL demonstration board package V2.0 offers an easy way to evaluate and demonstrate the company's-generation VDSL chipset (PEF 22810 V2.1, PEB 222811 V1.3 and PEF 22812 V2.2).

The IVES 22812 VDSL demonstration board package V2.0 serves as demonstration and evaluation platform for Infineon's 2nd-generation VDSL chipset. It supports fully-symmetrical data transmission of up to 12,96 Mbps, and asymmetrical data transmission of up to 25,92 Mbps over a simple twisted-pair telephone line. It provides an ATM-25 data interface for connection to a PC equipped with ATM-25 network interface cards. An additional connector allows direct access to the UTOPIA interface directly for test and evaluation purposes. The on-board POTS/ISDN splitter serves for demonstration of POTS/ISDN telephony over the same twisted pair while transmitting data over VDSL.

The software included has an easy-to-use graphical user interface to configure, monitor and control the VDSL chipset.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

36 – 43,5 GHz medium-power amplifier
23 October 2019, RFiber Solutions , Telecoms, Datacoms, Wireless, IoT
The CHA3398-98F from United Monolithic Semiconductors is a 4-stage monolithic medium-power amplifier, which produces 24 dB gain for 20 dBm output power. It is well suited for a wide range of applications, ...

Read more...
PA for wireless infrastructure
23 October 2019, RF Design , Telecoms, Datacoms, Wireless, IoT
The QPA9903 from Qorvo is a linearisable power amplifier (PA) that operates from 1805 to 1880 MHz, targeting Band 3 small-cell wireless infrastructure systems. The PA delivers an output power of 28 dBm ...

Read more...
DC-22 GHz MMIC amplifier
25 November 2019, RF Design , Telecoms, Datacoms, Wireless, IoT
The CMD284P4 from Custom MMIC is a wideband GaAs MMIC distributed amplifier housed in a leadless 4x4 mm plastic surface mount package. Suitable for S, C, X, Ku and K-band operation, the amplifier operates ...

Read more...
Automotive Bluetooth and Wi-Fi modules
25 November 2019, RF Design , Telecoms, Datacoms, Wireless, IoT
The JODY-W2 series from u-blox are automotive-grade RF modules supporting dual-band Wi-Fi 802.11a/b/g/n/ac and dual-mode Bluetooth 5 (Bluetooth BR/EDR and Low Energy). These compact modules are based ...

Read more...
Automotive-qualified TVS diodes
25 November 2019, Electrocomp , Circuit & System Protection
Bourns announced the release of the Model 15KPA-SD-Q transient voltage suppressor diode series. This series was designed for use in DC bus clamping applications and for the protection of sensitive electronic ...

Read more...
PCIe packet switches meet automotive demands
25 November 2019, Altron Arrow , Telecoms, Datacoms, Wireless, IoT
Diodes Incorporated announced the PI7C9X2G304EVQ and PI7C9X2G404EVQ PCIe 2.0 packet switches, offering 3-ports/4-lanes and 4-ports/4-lanes, respectively. The packet switches are automotive-compliant for ...

Read more...
Integrated switch and LNA module for 1-6 GHz
25 November 2019, RFiber Solutions , Telecoms, Datacoms, Wireless, IoT
The MAMF-011119, made by Macom Technology Solutions, is a compact surface-mount, high-power SPDT (single-pole double-throw) switch and 2-stage low noise amplifier (LNA) module. It includes an antenna ...

Read more...
Robust DC link capacitors
25 November 2019, Electrocomp , Passive Components
TDK’s new B2568* series of EPCOS MKP DC link power capacitors offer high robustness under harsh environmental conditions. The new capacitors are designed for voltages of between 900 and 3000 V d.c. and ...

Read more...
Dual-processor wireless SoC for demanding IoT applications
25 November 2019, RF Design , Telecoms, Datacoms, Wireless, IoT
Nordic Semiconductor’s new nRF5340 high-end multiprotocol system-on-chip (SoC) is the first member of its next generation of nRF5 Series SoCs. The nRF5340 builds on Nordic’s proven and globally adopted ...

Read more...
Waterproof 5G/4G antenna
25 November 2019, RF Design , Telecoms, Datacoms, Wireless, IoT
The Taoglas GSA.8835 is a fully IP67 rated waterproof 5G/4G external adhesive-mount antenna designed for use with all cellular modules worldwide, including new 5G bands. With extended wideband cellular ...

Read more...