|
|
New protocol analyser supports nine interface modules
16 Feb 2000, Telecoms, Datacoms, Wireless, IoT
Paul Louckx -
WWG SA has introduced a new protocol analyser. The DominoPlus is a single chassis that supports nine different interface modules and more than 20 high-speed network interfaces - a value proposition it says is unmatched in the network analysis industry.
The DominoPlus delivers laboratory-quality power and performance in a truly portable package. By employing multiple independent RISC processors coupled with a high speed hardware architecture, all DominoPLUS interface modules are capable of capturing and monitoring full duplex traffic at full line rate speeds.
The first release of DominoPLUS supports Fast Ethernet, ATM and HSSI high-speed WAN via plug-in modules. These modules are sold seperately or can be purchased in prepackaged configurations with the DominoPLUS chassis. Future modules will support FDDI and ATM25.
10/100 Fast Ethernet Interface (DominoFE)
Industry's First Support of Fast Etherchannel. The DominoFE solution, which supports both 10 and 100 Mbps Ethernet in half-and full-duplex mode, provides the industry's first ability to analyse and troubleshoot Fast EtherChannel network segments.
Fast EtherChannel is a new high-speed bandwidth aggregation technology for connecting LAN switches, routers and servers together to provide scalable and resilient switched networks. Fast EtherChannel provides network managers with the ability to create fast, reliable, high-speed backbones using existing cabling and network device infrastructure at minimal cost.
Because EtherChannel is comprised of several links, the ability for complete monitoring, diagnosis and troubleshooting across all links goes beyond the ability of other analysers on the market. DominoPLUS's unique stacking ability allows up to eight Domino analysers to be controlled locally by one PC. Further, all the Domino analysers in a stack have synchronised time stamps, so analysis can be performed across segments, devices and networks.
For further information contact Paul Louckx, WWG SA, (011) 266 1817. |
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- Flexible wall-mount whip antenna
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The Cyclops WM.95 from Taoglas is a high-efficiency (over 50%) 915 MHz flexible whip antenna with a screw-mounted wall-mount L bracket. The radiation pattern is omnidirectional in the azimuth, allowing ...
- Bluetooth LE pass-through module
26 June 2019, Icorp Technologies, Telecoms, Datacoms, Wireless, IoT
The HM-BT4501 from HopeRF is a wireless data pass-through module based on a CMT4501 low-power Bluetooth 5.0 chip. By connecting with a microcontroller, it can be used to realise a connection and data ...
- Positioning module for autonomous driving
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The ZED-F9K from u-blox is a high-precision multiband GNSS (global navigation satellite system) module with built-in inertial sensors. The module combines the latest generation of GNSS receiver technology, ...
- Automotive smart hub ICs
26 June 2019, Avnet South Africa, Telecoms, Datacoms, Wireless, IoT
Microchip Technology has added new single-port USB smart hub ICs to its family of USB automotive products. The USB4912 and the USB4712 can be used to add a single port under the radio, in the centre console ...
- Wideband amplifier for instrumentation
26 June 2019, RFiber Solutions, Telecoms, Datacoms, Wireless, IoT
MACOM Technology Solutions announced a new wideband distributed amplifier with the introduction of the MAAM-011275-DIE. Offered as a bare die, this amplifier is well suited for use in test and measurement ...
- Positioning and cellular antenna
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The Tycho MA310 antenna is a combination, small form factor GPS/GLONASS and penta-band cellular (GSM/GPRS/CDMA/ PCS/DCS/ WCDMA/UMTS) antenna to simplify AVL or fleet management antenna systems worldwide.
Made ...
- RF power doubler
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The QPA3357 from Qorvo is a power doubler that operates from 47 to 1218 MHz. It provides an output power of 57 dBm, a gain of 28 dB, and has a noise figure of 4,5 dB. This power doubler is matched to ...
- Ka-band power amplifier
26 June 2019, RFiber Solutions, Telecoms, Datacoms, Wireless, IoT
MACOM Technology Solutions’ new MAAP-011250 is a balanced 4 W power amplifier (PA) operating from 27,5 – 30 GHz, making it well suited for SATCOM and VSAT applications.
With the addition of this new ...
- Flexible wideband antenna
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The Taoglas FXUB64.18.0150C flexible wideband antenna has been designed to cover all working frequencies in the 600-3000 MHz spectrum, covering all cellular, 2,4 GHz Wi-Fi, ISM, NB-IoT, CAT-M1 and A-GPS ...
- High-frequency power dividers
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
Pasternack has launched a new series of high-frequency power dividers targeted at 5G cellular communication, automotive radar and satellite communication applications.
The lineup consists of 17 new ...
- Cellular module for LPWA applications
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
u-blox has announced the SARA R5 series of LTE M and NB-IoT modules for low power wide area (LPWA) IoT applications. The module, built on the UBX R5 cellular chipset and the M8 GNSS receiver chip, is ...
- Hinged 4G LTE antenna
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The hinged Apex II TG.35 wideband dipole antenna from Taoglas has been designed to cover all cellular, ISM and Wi-Fi working frequencies in the 600-6000 MHz spectrum. It has been primarily designed for ...
|
|
