mobile | classic
Dataweek Electronics & Communications Technology Magazine





Follow us on:
Follow us on Facebook Share via Twitter Share via LinkedIn


Search...

Electronics Buyers' Guide

Electronics Manufacturing & Production Handbook 2019


 

Multiport LIUs
28 August 2002, Telecoms, Datacoms, Wireless, IoT

TDK Semiconductor offers two new families of multiport DS3/E3/STS-1 transceiver devices, adding dual, triple and quad port options to its current LIU products. The single channel LIU operates at both 5 and 3,3 V, while the multichannel LIUs operate at 3,3 V with 5 V I/O tolerance. The receivers recover clock and data from a B3ZS or HDB3-coded AMI signal and can compensate for over 12 dB of cable loss. All multiport devices also include redundancy circuitry to simplify system designs. The 78P7200L/02L/03L/04L devices offer a low-cost, reduced functionality option, whereas the 78P2241B/42/43/44 add the B3ZS/HDB3 ENDECs, monitor modes, and line code violation detection functionality. The dual port versions come in 80-pin TQFP package, triple and quad in 128-pin TQFP package.


Credit(s)
Supplied By: Electrocomp
Tel: +27 11 458 9000
Fax: +27 11 458 9034/5
Email: andrew@electrocomp.co.za
www: www.electrocomp.co.za
  Share on Facebook Share via Twitter Share via LinkedIn    

Further reading:

  • Double-balanced X-band mixer
    26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
    The MM1-0832LSM is a double-balanced mixer from Marki Microwave with an RF/LO frequency from 8 to 32 GHz and an IF frequency from DC to 12 GHz. This high-frequency X-band GaAs MMIC mixer works well as ...
  • Low-noise RF amplifier
    26 June 2019, Telecoms, Datacoms, Wireless, IoT
    The CMD299 from Custom MMIC is a wideband GaAs MMIC low-noise amplifier that operates from 18 to 40 GHz. It provides an output power of up to 7,5 dBm (0,0056 W), a gain of 16 dB, and has a noise figure ...
  • Flexible wall-mount whip antenna
    26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
    The Cyclops WM.95 from Taoglas is a high-efficiency (over 50%) 915 MHz flexible whip antenna with a screw-mounted wall-mount L bracket. The radiation pattern is omnidirectional in the azimuth, allowing ...
  • Sealed enclosures for industrial electronics
    26 June 2019, Electrocomp, Enclosures, Racks, Cabinets & Panel Products
    Hammond Manufacturing has added 36 new configurations to its 1554 and 1555 sealed enclosure families for Industry 4.0. Available in ABS or polycarbonate with styled, opaque, clear or smoked lids, the ...
  • Bluetooth LE pass-through module
    26 June 2019, Icorp Technologies, Telecoms, Datacoms, Wireless, IoT
    The HM-BT4501 from HopeRF is a wireless data pass-through module based on a CMT4501 low-power Bluetooth 5.0 chip. By connecting with a microcontroller, it can be used to realise a connection and data ...
  • Positioning module for autonomous driving
    26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
    The ZED-F9K from u-blox is a high-precision multiband GNSS (global navigation satellite system) module with built-in inertial sensors. The module combines the latest generation of GNSS receiver technology, ...
  • Automotive smart hub ICs
    26 June 2019, Avnet South Africa, Telecoms, Datacoms, Wireless, IoT
    Microchip Technology has added new single-port USB smart hub ICs to its family of USB automotive products. The USB4912 and the USB4712 can be used to add a single port under the radio, in the centre console ...
  • Wideband amplifier for instrumentation
    26 June 2019, RFiber Solutions, Telecoms, Datacoms, Wireless, IoT
    MACOM Technology Solutions announced a new wideband distributed amplifier with the introduction of the MAAM-011275-DIE. Offered as a bare die, this amplifier is well suited for use in test and measurement ...
  • Consumer grade power inductors
    26 June 2019, Electrocomp, Passive Components
    Bourns is introducing the Model SRP7028C, SRP1038C and SRP1770C high-current shielded power inductor series, designed to meet today’s high current density requirements in various types of consumer electronics ...
  • Positioning and cellular antenna
    26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
    The Tycho MA310 antenna is a combination, small form factor GPS/GLONASS and penta-band cellular (GSM/GPRS/CDMA/ PCS/DCS/ WCDMA/UMTS) antenna to simplify AVL or fleet management antenna systems worldwide. Made ...
  • RF power doubler
    26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
    The QPA3357 from Qorvo is a power doubler that operates from 47 to 1218 MHz. It provides an output power of 57 dBm, a gain of 28 dB, and has a noise figure of 4,5 dB. This power doubler is matched to ...
  • Ka-band power amplifier
    26 June 2019, RFiber Solutions, Telecoms, Datacoms, Wireless, IoT
    MACOM Technology Solutions’ new MAAP-011250 is a balanced 4 W power amplifier (PA) operating from 27,5 – 30 GHz, making it well suited for SATCOM and VSAT applications. With the addition of this new ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronics Buyers’ Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    Classic | Mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.