High linearity DC to 3 GHz mixer
9 October 2002
Telecoms, Datacoms, Wireless, IoT
Linear Technology's high linearity, down-converting active mixer, the LT5512, offers a class-leading combination of linearity and ease of use over a wide frequency range up to 3 GHz. The part is specified with an input IP3 of +20 dBm and +17 dBm, at 950 and 1900 MHz, respectively. The device is 100% RF production tested, and extensively characterised for high linearity. It is a high linearity alternative to passive mixers, offering conversion gain and significantly lower LO drive levels. The IC includes a differential LO buffer amplifier and an active double-balanced mixer. An integrated RF buffer amplifier improves LO-RF isolation and eliminates the need for precision external bias resistors. The LT5512 also includes temperature-compensated biasing circuitry and a power-down enable/disable circuit. The IC is manufactured in a small 4 X 4 mm QFN package, and operates over 4,5 to 5,25 V.
Further reading:
Macom targets broadband radar with time delay MMIC
RFiber Solutions
Telecoms, Datacoms, Wireless, IoT
Macom’s MADU FR1012 is a GaAs MMIC 1-bit true time delay device covering 4 GHz to 12 GHz, designed for broadband microwave systems where beam accuracy and signal integrity are critical.
Read more...
Compact analogue phase shifter
RF Design
Telecoms, Datacoms, Wireless, IoT
The Mini-Circuits JSPHS-150+ is a compact analogue voltage-controlled phase shifter designed for narrowband RF applications between 100 and 150 MHz.
Read more...
Wireless connectivity expanded
iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Espressif Systems has introduced two new members of its ESP32 wireless SoC family: the ESP32-E22, the company’s first Wi-Fi 6E connectivity chip, and the ESP32-H21, an ultra-low-power Bluetooth LE microcontroller aimed at coin-cell and battery-powered devices.
Read more...
Integrated X-band radar front-end module
RF Design
Telecoms, Datacoms, Wireless, IoT
Qorvo has introduced an X-band radar front-end solution that enables defence system designers to achieve higher performance without increasing size, weight or prime power.
Read more...
Introducing Aurata
CST Electronics
Telecoms, Datacoms, Wireless, IoT
Antenova has launched Aurata SR4L112: a compact, high efficiency embedded 4G/LTE antenna engineered for long, narrow PCB designs.
Read more...
Multi-constellation GNSS module in a legacy-compatible footprint
Altron Arrow
Telecoms, Datacoms, Wireless, IoT
Telit Cinterion has announced the SE869eK2L, a single-frequency L1 GNSS module designed to help device manufacturers upgrade legacy positioning designs with improved performance and cost efficiency, while preserving design continuity.
Read more...
Quectel expands 5G portfolio
iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Quectel expands 5G portfolio with new Qualcomm- and UNISOC-based modules.
Read more...
Compact RTK design: More than just the receiver
iCorp Technologies
Editor's Choice Telecoms, Datacoms, Wireless, IoT
In practice, engineers building compact RTK products keep discovering the same thing: the hardest component in the system is no longer the receiver. It is the antenna.
Read more...
Microchip advances Space-Grade timing performance
ASIC Design Services
Telecoms, Datacoms, Wireless, IoT
Microchip Technology has expanded its atomic clock portfolio with the radiation-tolerant Space CSAC-SA65, a Chip Scale Atomic Clock designed to deliver precise timing for space systems.
Read more...
Channel emulator for 6 G and Wi-Fi 7/8
Concilium Technologies
Telecoms, Datacoms, Wireless, IoT
With 400 MHz instantaneous bandwidth and support for carrier frequencies up to 23,6 GHz, Vertex 6.0 is the industry’s first channel emulator designed for next generation 6 G and Wi-Fi 7/8 testing.
Read more...