Qorvo announced the latest additions to its innovative RF portfolio of GaN power amplifiers and FTTH xPON video receivers, which serve a wide range of radar, electronic warfare, satellite, 5G and DOCSIS 3.1 CATV applications. These high-performance solutions simplify RF for designers worldwide and are available at Qorvo's authorised channel partners.
The QPA2212D GaN power amplifier (PA) is rated at 25 W from 27-31 GHz, with specifications including a PSAT of 44 dBm, 10 W linear power at 25 dBc IMD3, and small signal gain of 22 dB. Supplied on a 3,6 x 5 mm die, it is ideal for 5G and satellite communications.
The TGA2962 GaN PA is rated at 10 W from 2-20 GHz, with specifications including a PSAT of 40 dBm and PAE between 20% and 35%. Supplied on a 3,2 x 3,2 mm die, it is ideal for radar, EW (electronic warfare) and communications systems.
The QPA2598 GaN PA is rated at 2,5 W from 6-12 GHz, with specifications including a PSAT of 34 dBm, PAE of 30% and small signal gain of 22 dB. Supplied on a 4 x 4 mm die, it is ideal for radar, EW and communications systems.
The QPL7434 is an FTTH xPON differential video receiver with a bandwidth of 47 – 1218 MHz, optical input range of +2 dBm to -20 dBm, >27 dB gain at 550 MHz; and low noise of 32,8 pA/√Hz equivalent input noise current (EINC). It comes in a 4 x 4 x 0,85 mm QFN package and is ideal for FTTH xPON and DOCSIS 3.1 CATV.
Antennas to meet all connectivity requirements Electrocomp
Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.
Read more...Introducing SIMCom’s new A7673X series Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat 1 bis module that supports LTE-FDD, with a maximum downlink rate of 10 Mbps and an uplink rate of 5 Mbps.
Read more...18 W monolithic microwave amplifier RFiber Solutions
Telecoms, Datacoms, Wireless, IoT
The CHA8612-QDB is a two stage, high-power amplifier operating between 7,9 and 11 GHz. The monolithic microwave amplifier can typically provide 18 W of saturated output power and 40% of power-added efficiency.
Read more...LoRaWAN-certified sub-GHz module Altron Arrow
Telecoms, Datacoms, Wireless, IoT
The STM32WL5M from ST Microelectronics is the company’s first LoRaWAN-certified module which incorporates two cores, one of them being a wireless stack to optimise the creation of sub-GHz applications.
Read more...3D depth sensing sensor Avnet Silica
Telecoms, Datacoms, Wireless, IoT
A recent announcement by STMicroelectronics has revealed an all-in-one, direct Time-of-Flight (dToF) 3D LiDAR (Light Detection And Ranging) module with 2,3k resolution.
Read more...Nordic expands nRF91 series RF Design
DSP, Micros & Memory
Nordic Semiconductor has announced the expansion of its nRF91 series cellular IoT devices with the introduction of the nRF9151 System-in-Package (SiP).
Read more...Quectel announces module for RedCap comms Quectel Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
The Quectel RG255G offers downlink performance of 220 Mbps, and uplink performance of 121 Mbps on 256QAM or 91 Mbps on 64QAM.
Read more...Wide-Bandgap Developer Forum Infineon Technologies
Telecoms, Datacoms, Wireless, IoT
This year marks a new chapter for this exclusive event series – all specialist presentations will be broadcasting live from a studio in Munich.
Read more...Multimode smart LTE module with GNSS Quectel Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
The AW200Z LTE module is equipped with Bluetooth and Wi-Fi functionalities, and is powered by Qualcomm's advanced 64-bit quad-core Cortex-A53 processors, coupled with an integrated Adreno 702 GPU.
Read more...LEXI-R10 series cellular module RF Design
Telecoms, Datacoms, Wireless, IoT
The LEXI-R10 Series from u-blox are LTE Cat 1 bis modules that support multi-band LTE-FDD, and are designed for size-constrained devices.
printer friendly version