Telecoms, Datacoms, Wireless, IoT


Sigfox verified modem module

25 November 2020 Telecoms, Datacoms, Wireless, IoT

The BSM8001-01, made by ESMT, is a Sigfox verified modem module for the low power wide area network (LPWAN) market. It is designed with ESMT ’s Uplynx XS8001 system-on-chip (SoC). The module was designed for high performance, high quality, small form factor and a low cost. The design is fully compliant to ETSI regulations.

The Sigfox application is ported over the Uplynx XS8001 and executed at high efficiency using its internal 32-bit core processor. Every module is preloaded with Sigfox application software and module-specific ID/KEY/PAC as specified by the Sigfox network system. The preloaded software also includes a bootloader which allows software updates or future user application development.

Product features:

• Sigfox verified RF modem (reference design fully certified).

• Frequency range: ISM 868 MHz.

• Maximum output power: 18 dBm.

• Current consumption: 60 mA at 14 dBm.

• Operating voltage: 2,5 V to 5,5 V.

• Operating temperature: -40°C to 80°C.

• Module enabling pin (POW_EN).

• 0,05 μA off-current.

• 19 x 13,5 mm (including RF output) land grid array (LGA-21).


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Full sensor to cloud solution
CST Electronics Telecoms, Datacoms, Wireless, IoT
NeoCortec has demonstrated the seamless and rapid development of full sensor-to-cloud solutions using NeoMesh Click boards from MikroE and the IoTConnect cloud solution from Avnet.

Read more...
Long-range Wi-Fi HaLow module
TRX Electronics Telecoms, Datacoms, Wireless, IoT
One of Mouser’s newest products is the Morse Micro MM6108-MF08651-US Wi-Fi HaLow Module, which adheres to the IEEE 802.11ah standard.

Read more...
Quectel launches 3GPP NTN comms module
Quectel Wireless Solutions Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has announced the Quectel BG95-S5 3GPP non-terrestrial network (NTN) satellite communication module.

Read more...
SIMCom’s A7673x series
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat.1 bis module based on the ASR1606 chipset, that supports wireless communication modes of LTE-FDD, with a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps.

Read more...
Accelerating the commercialisation of the 5G IoT markets
Altron Arrow Editor's Choice Telecoms, Datacoms, Wireless, IoT
Fibocom unveils Non-Terrestrial Networks (NTN) module MA510-GL, enabling satellite and cellular connectivity to IoT applications.

Read more...
ESP32-P4 high-performance MCU
iCorp Technologies AI & ML
Powered by a dual-core RISC-V CPU running up to 400 MHz, ESP32-P4 also supports single-precision FPU and AI extensions, thus providing all the necessary computational resources.

Read more...
Long-range connectivity module
Avnet Silica Telecoms, Datacoms, Wireless, IoT
Digi XBee XR 868 RF Modules support the deployment of long-range connectivity applications, and support point-to-point and mesh networking protocols.

Read more...
4G LTE-M/NB-IoT connectivity reference design
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Developed around the industry-leading Nordic nRF9160 module, the platform comes complete with a newly-developed LTE antenna, ATRIA, which is pre-certified to operate over the full LTE-M and NB-IoT bands.

Read more...
Antennas to meet all connectivity requirements
Electrocomp Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.

Read more...
Introducing SIMCom’s new A7673X series
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat 1 bis module that supports LTE-FDD, with a maximum downlink rate of 10 Mbps and an uplink rate of 5 Mbps.

Read more...