Telecoms, Datacoms, Wireless, IoT


SoC with Wi-Fi and Bluetooth LE support

30 May 2022 Telecoms, Datacoms, Wireless, IoT

Espressif Systems’ ESP32-C2 incorporates Wi-Fi 4 and Bluetooth 5 (LE), and was specifically developed to target simple high-volume, low-data-rate IoT applications such as smart plugs and smart lightbulbs.

The chip comes in a 4 mm square package with 272 KB of memory. It runs frameworks such as ESP-Jumpstart and ESP RainMaker, as well as ESP-IDF, which is Espressif’s open-source, real-time operating system for embedded IoT devices. This SoC also continues the tradition of Espressif’s strong security, having features such as secure boot and Flash encryption, while also providing a hardware chain of trust for any applications.

The enhanced RF performance of the ESP32-C2 allows the device to transmit 802.11n packets (72,2 Mbps) with 18 dBm of output power, and it can transmit at the full 20 dBm FCC limit for low data rates..


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Full sensor to cloud solution
CST Electronics Telecoms, Datacoms, Wireless, IoT
NeoCortec has demonstrated the seamless and rapid development of full sensor-to-cloud solutions using NeoMesh Click boards from MikroE and the IoTConnect cloud solution from Avnet.

Read more...
Long-range Wi-Fi HaLow module
TRX Electronics Telecoms, Datacoms, Wireless, IoT
One of Mouser’s newest products is the Morse Micro MM6108-MF08651-US Wi-Fi HaLow Module, which adheres to the IEEE 802.11ah standard.

Read more...
Quectel launches 3GPP NTN comms module
Quectel Wireless Solutions Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has announced the Quectel BG95-S5 3GPP non-terrestrial network (NTN) satellite communication module.

Read more...
SIMCom’s A7673x series
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat.1 bis module based on the ASR1606 chipset, that supports wireless communication modes of LTE-FDD, with a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps.

Read more...
Accelerating the commercialisation of the 5G IoT markets
Altron Arrow Editor's Choice Telecoms, Datacoms, Wireless, IoT
Fibocom unveils Non-Terrestrial Networks (NTN) module MA510-GL, enabling satellite and cellular connectivity to IoT applications.

Read more...
ESP32-P4 high-performance MCU
iCorp Technologies AI & ML
Powered by a dual-core RISC-V CPU running up to 400 MHz, ESP32-P4 also supports single-precision FPU and AI extensions, thus providing all the necessary computational resources.

Read more...
Long-range connectivity module
Avnet Silica Telecoms, Datacoms, Wireless, IoT
Digi XBee XR 868 RF Modules support the deployment of long-range connectivity applications, and support point-to-point and mesh networking protocols.

Read more...
4G LTE-M/NB-IoT connectivity reference design
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Developed around the industry-leading Nordic nRF9160 module, the platform comes complete with a newly-developed LTE antenna, ATRIA, which is pre-certified to operate over the full LTE-M and NB-IoT bands.

Read more...
Antennas to meet all connectivity requirements
Electrocomp Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.

Read more...
Introducing SIMCom’s new A7673X series
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat 1 bis module that supports LTE-FDD, with a maximum downlink rate of 10 Mbps and an uplink rate of 5 Mbps.

Read more...