Antenova has added a new offering to its range of miniature surface mount designed (SMD) antennas and modules for GNSS applications. The new antenna, Agosti, measures 9,0 x 5,8 x 1,7 mm and operates with exceptional efficiency in a reduced space on a corner of a PCB.
The key advantage of the Agosti antenna is its small ground plane requirement. Most SMD antennas use the surface of the PCB around the antenna as a ground plane to radiate signal from, so it is the ground plane requirement not the physical dimensions of the antenna that defines the space it needs. Antenova’s radiated measurement results show Agosti operating well on small ground planes of 40 x 20 mm, 70 x 25 mm and 80 x 30 mm, making it a good choice for small form factor designs. Agosti also offers designers some additional layout options, as it is designed to be placed on a corner of their PCB.
Agosti is designed to integrate and co-exist with other antennas within the same device. On board diagnostics (OBDs) and trackers often use 4G/LTE with A-GPS for fall-back and the Agosti antenna has been tested with Antenova’s Pharoah antenna, which also has a small ground plane requirement. The two antennas have excellent isolation and can operate in close proximity to each other in a very small device without the 4G signal interfering with sensitive GNSS signals.
Antenova’s product marketing manager, Michael Castle says,“Small SMD antennas such as Agosti are an exciting alternative to the common delicate ceramic patch antennas used in GNSS designs. This is not just because the SMD antennas are significantly smaller, it is also because they provide omni-directional performance. Patch antennas are typically 12 or 14 mm square, are heavier than SMD antennas, and need a much larger ground plane and keep-out area. They also must be placed in the centre of a circuit board and only work well when they point at the sky. Antenova’s new generation of SMD antennas overcome all these limitations and perform well regardless of position and orientation of the device.”
Agosti’s small ground plane and good isolation make it ideal for small wearable devices, trackers and OBDs which move around freely. It offers the two key advantages of being both omni-directional and small.
Industrial Ethernet time sensitive networking switch RS South Africa
Telecoms, Datacoms, Wireless, IoT
The ADIN3310 and ADIN6310 are 3-port and 6-port Gigabit Ethernet time sensitive networking (TSN) switches with integrated security primarily designed for industrial Ethernet applications.
Read more...Automotive-grade digital isolators
Telecoms, Datacoms, Wireless, IoT
The NSI83xx series of capacitive-based isolators from NOVOSENSE Microelectronics offer superior EOS resilience and minimal power noise susceptibility.
Read more...Why bis means business for LTE Cat 1 IoT connections NuVision Electronics
Editor's Choice Telecoms, Datacoms, Wireless, IoT
Tomaž Petaros, product manager IoT EMEA at Quectel Wireless Solutions explains why the market for Cat 1bis IoT connections is getting busy.
Read more...Wi-Fi in 2025: When is Wi-Fi 7 the answer? iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Wi-Fi 7 introduces multi-link operation and lower latency, a game-changing feature that allows devices to transmit and receive data across multiple frequency bands simultaneously to significantly reduce network congestion.
Read more...Bluetooth Lite SoCs purpose built for IoT NuVision Electronics
Telecoms, Datacoms, Wireless, IoT
Whether it is enabling predictive maintenance on industrial equipment, tracking assets in dense environments, or running for years on a coin cell battery in ultra-low power sensors, developers need solutions that are lean, reliable, and ready to scale with emerging use cases.
Read more...LTE Cat 1bis module Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
The A7673X LTE Cat 1bis module from SimCom is engineered to meet the growing demands of the IoT industry, offering exceptional performance and seamless integration.
Read more...Track with precision Electrocomp
Telecoms, Datacoms, Wireless, IoT
KYOCERA AVX provides innovative antennas for cellular, LTE-M, NB-IoT, LoRa, GNSS, BLE, UWB, Wi-Fi, and future Satellite IoT.
Read more...Wi-Fi 7 front-end module RF Design
Telecoms, Datacoms, Wireless, IoT
The Qorvo QPF4609 is an integrated front end module designed for 802.11be systems that has integrated matching, which minimises layout area.
Read more...Multi-channel downconverter Vepac Electronics
Telecoms, Datacoms, Wireless, IoT
The Downconverter from Crane Aerospace is a converter that operates from 2 to 18 GHz and delivers a noise figure of 11 dB with an attenuation range of 25 dB.
printer friendly version