Telecoms, Datacoms, Wireless, IoT


High-performance GNSS module

30 August 2024 Telecoms, Datacoms, Wireless, IoT

The SIM66D-R from Simcom is a high-performance standalone L1 + L5 dual-band GNSS module. With integrated low-noise amplifier, the module achieves a high level of sensitivity and accuracy. Time to First Fix (TTFF) is low thanks to the built-in AGNSS support; a cold start takes 24 s, while a hot start is less than 1 s. The module consumes 10 mA in both acquisition and tracking mode, with only a 1 µA draw in backup mode.

The SIM66D-R provides simultaneous connection to GPS, GLONASS, BeiDou, Galileo, and QZSS constellations on L1, and connection to GPS, BeiDou, Galileo, QZSS and NAVIC constellations on L5. The module can acquire and track any mix of multiple satellite signals, making it useful for determining position in mountainous and dense urban areas.

Besides the standard UART interface, the SIM66D-R also provides I2C and digital I/O with a pulse per second signal. Communication protocol is the NMEA standard.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Wireless connectivity expanded
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Espressif Systems has introduced two new members of its ESP32 wireless SoC family: the ESP32-E22, the company’s first Wi-Fi 6E connectivity chip, and the ESP32-H21, an ultra-low-power Bluetooth LE microcontroller aimed at coin-cell and battery-powered devices.

Read more...
Integrated X-band radar front-end module
RF Design Telecoms, Datacoms, Wireless, IoT
Qorvo has introduced an X-band radar front-end solution that enables defence system designers to achieve higher performance without increasing size, weight or prime power.

Read more...
Introducing Aurata
CST Electronics Telecoms, Datacoms, Wireless, IoT
Antenova has launched Aurata SR4L112: a compact, high efficiency embedded 4G/LTE antenna engineered for long, narrow PCB designs.

Read more...
Multi-constellation GNSS module in a legacy-compatible footprint
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Telit Cinterion has announced the SE869eK2L, a single-frequency L1 GNSS module designed to help device manufacturers upgrade legacy positioning designs with improved performance and cost efficiency, while preserving design continuity.

Read more...
Quectel expands 5G portfolio
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Quectel expands 5G portfolio with new Qualcomm- and UNISOC-based modules.

Read more...
Compact RTK design: More than just the receiver
iCorp Technologies Editor's Choice Telecoms, Datacoms, Wireless, IoT
In practice, engineers building compact RTK products keep discovering the same thing: the hardest component in the system is no longer the receiver. It is the antenna.

Read more...
Microchip advances Space-Grade timing performance
ASIC Design Services Telecoms, Datacoms, Wireless, IoT
Microchip Technology has expanded its atomic clock portfolio with the radiation-tolerant Space CSAC-SA65, a Chip Scale Atomic Clock designed to deliver precise timing for space systems.

Read more...
Channel emulator for 6 G and Wi-Fi 7/8
Concilium Technologies Telecoms, Datacoms, Wireless, IoT
With 400 MHz instantaneous bandwidth and support for carrier frequencies up to 23,6 GHz, Vertex 6.0 is the industry’s first channel emulator designed for next generation 6 G and Wi-Fi 7/8 testing.

Read more...
Secure, low-power Bluetooth LE SoC
NuVision Electronics Telecoms, Datacoms, Wireless, IoT
Silicon Labs unveils BG2B, its lowest-power Bluetooth LE SoC with industry-leading power efficiency, security, and integration.

Read more...
High-isolation RF switch optimised for broadband cable
Telecoms, Datacoms, Wireless, IoT
pSemi Corporation has announced the PE42727 UltraCMOS SPDT RF Switch, a high-isolation solution optimised for next generation broadband cable applications.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved