Tel: | +27 11 608 3001 |
Email: | [email protected] |
www: | www.actum.co.za |
more information about Actum Electronics |
Erni's DIN 41612 connector family comprises 25 basic sizes and has many complementary versions.
Developed for use in 19" rack systems in accordance with DIN 41494, the large number of different sizes
read more
Erni has designed its cable assemblies to mate reliably with its popular 2 mm H.M. shroud systems (compatible with IEC-61076-4-101 connector standard). The Ermet shroud system is well suited for rugged
read more
Rated at 12 V d.c. 200 mA/6 V d.c. 300 mA the MMS 124/134 and 224 series of microminiature switches from Knitter-Switch are good for more than 10 000 operations. The gullwing terminations are silver-plated
read more
Erni now offers halogen-free cable for use with its SMC range of 1,27 mm pitch IDC connectors. Primarily for use in aircraft and other applications where - in the event of a fire, plastic cable would
read more
The electrodes of Eurofarad's M90/94 self-healing capacitor types are constructed for: low impedance at high frequencies (20/30 kHz to 1 MHz); low series resistance; low series inductance; and 50 to 125°C
read more
Knitter-Switch's TSSE range of tact switches come fitted with silicon actuators from 1 mm to 2 and 3 mm long depending on version/s required. The silvered contacts are good for 500 000 operations at temperatures
read more
The Series SMC (small multiple connector) miniature connector developed by Erni now offers handling properties for surface-mount soldering.
The connectors have a contact spacing on a 1,27 mm square grid
read more
Knitter-Switch offers a range of BCD/inverse and hexadecimal/inverse code switches for PCB and SMT-mount in top adjust (type DRS) and side adjust (type DRR).
They feature: smaller size - 7,5 mm square
read more
To ensure that only acceptable tolerance connector mouldings are produced in its factory, Erni uses a 3D measuring instrument especially developed by C E Johanssen of Sweden in conjunction with Optical
read more
For backplanes, press-in technology is state-of-the-art. The other application area for male press-fit connectors is for single or double-sided SMT printed circuit boards. For these applications Erni
read more
High data transfer rates (such as when signals exceed 1 Gbit/s levels), determine the components used in backplanes and connectors. Modern high speed telecom/datacom systems require exacting and precise
read more
The IDG-A1 rail-mount enclosure from Erni is suited for applications requiring a housing for smaller PCBs and minimal DIN rail space loss. The IDG-A1 has sleek lines, making this an attractive packaging
read more
© Technews Publishing (Pty) Ltd | All Rights Reserved