RF Design

Tel: +27 21 555 8400
Email: [email protected]
www: www.rfdesign.co.za
more information about RF Design

X-band waveguide limiter
30 March 2022, RF Design, Telecoms, Datacoms, Wireless, IoT

The MALI-007212 from API Technologies is a waveguide limiter that operates in the X-band from 9 to 9,6 GHz. It has a flat leakage of less than 50 mW and spike leakage of 250 mW and can handle a mean ...
read more


Single-layer RF capacitors
30 March 2022, RF Design, Passive Components

The V80 Series of single-layer capacitors from Knowles Precision Devices have a capacitance value of 100 nF. They are designed for DC blocking or RF bypass applications in a broad frequency range. These ...
read more


Air-core RF inductors
30 March 2022, RF Design, Passive Components

The 111SQ from Coilcraft is a square air-core inductor series with a remarkably high quality factor of up to 200 at 400 MHz. The parts come in a range of inductances from 27 µH to 47 µH and have a self-resonant ...
read more


Double-pole double-throw RF switch
30 March 2022, RF Design, Telecoms, Datacoms, Wireless, IoT

The MM5600 from Menlo Micro is a DPDT (double-pole double-throw) switch that operates from DC to 40 Gbps. It has a low insertion loss of 0,75 dB (at 12 GHz) and fast switching speed and can operate for ...
read more


Wi-Fi 6 front-end module
30 March 2022, RF Design, Telecoms, Datacoms, Wireless, IoT

The QPF4568 from Qorvo is a Wi-Fi 6 (802.11ax) front-end module that operates from 5150 to 5925 MHz. It has a 5 GHz power amplifier (PA), single-pole two-throw (SP2T) switch, bypassable low-noise amplifier ...
read more


Access serial devices on the go
30 March 2022, RF Design, Telecoms, Datacoms, Wireless, IoT

RS-232 and RS-485 interfaces remain widely used in the industrial world because of their reliability, cost-effectiveness and simplicity. However, servicing devices via a serial port usually entails lugging ...
read more


Capacitors for DC blocking and RF bypass applications
30 March 2022, RF Design, Passive Components

The V80 Series of single-layer capacitors from Knowles Precision Devices have a capacitance value of 100 nF and have been designed for DC blocking or RF bypass applications across a broad frequency range. ...
read more


IO Ninja cuts through Modbus analysis complexity
30 March 2022, RF Design, Test & Measurement

There is no need to translate every bit of the packet manually – the user just adds the layer to the pipeline and everything is automatically parsed for them.
read more


Discrete GaAs pHEMT die covering DC to GHz
30 March 2022, RF Design, Telecoms, Datacoms, Wireless, IoT

The QPD2018D from Qorvo is a discrete, 180 micron GaAs pHEMT transistor (pseudomorphic high-electron-mobility transistor) that operates from DC to 20 GHz. It provides a gain of 14 dB with a power-added ...
read more


Temperature-compensated LNA in rugged aluminium housing
30 March 2022, RF Design, Telecoms, Datacoms, Wireless, IoT

Pasternack Enterprises’ PE15A5101 is a temperature-compensated low-noise amplifier (LNA) that operates from 0,5 to 4 GHz. It provides a small signal gain of more than 35 dB with a noise figure of less ...
read more


Bluetooth indoor positioning antenna board for commercial end-products
30 March 2022, RF Design, Telecoms, Datacoms, Wireless, IoT

The ANT-B10 antenna board for Bluetooth direction finding and indoor positioning applications has been unveiled by u-blox. Designed for integration into commercial end-products, the board enables low-power, ...
read more


Wi-Fi 6 transceiver supports 8x8 MIMO
30 March 2022, RF Design, Telecoms, Datacoms, Wireless, IoT

The QT7860 from onsemi is a Wi-Fi 6 transceiver that operates from 5 to 7 GHz. It can support an 8Tx/8Rx chain for 8x8 MIMO or two independent 4x4 MIMO chains, for bandwidths of 20/40/80/160  MHz in both ...
read more





<< First   < Previous   Page 11 of 130   Next >   Last >>







While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved