Multiport modem cards

Telecoms, Datacoms, Wireless, IoT

Microwave semiconductor & tube suppliers

Radio system suppliers

RF module & subsystem suppliers

Telephony IC suppliers

Wireless system IC/module suppliers

printer friendly version

24 January 2001 Telecoms, Datacoms, Wireless, IoT

Connect Tech's modem cards, the MaxxAccess, are four and eight port, multiport modem cards for PCI bus compatible computers. MaxxAccess 4/8 adapters offer four or eight V.90 56k modems on one PCI bus adapter to provide high-speed data, fax and voice communications on one integrated product. With the appropriate off-the-shelf software, the MaxxAccess allows one to connect with other remote users through modem pools, fax servers or remote access servers.

Key features are: four or eight V.90 56k modems; data, fax and voice operation; industry standard Rockwell modem chipset; can accommodate large applications, with up to eight adapters per system; hardware flow control; Windows-based diagnostics.

Rapid data transfer rates of up to 230 Kbps on the data modem interface, 56 Kbps on the modem interface and 14,4 Kbps on the facsimile are possible. State-of-the-art 16C654 quad UARTs with 64 byte TxD/RxD FIFO buffers offload interrupt handling and buffering from the main CPU, thus improving the overall system performance.

The MaxxAccess 4/8 adapters support all the most popular operating systems and communications software. An enhanced AT command set is also provided. MaxxAccess 4/8 adapters are fully PCI plug-&-play compliant and come ready for simple installation. Included are a board, four or eight RJ-11 phone cables, device drivers software and a comprehensive manual.

Share this article:

SIMCom’s A7673x series
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat.1 bis module based on the ASR1606 chipset, that supports wireless communication modes of LTE-FDD, with a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps.

Read more...

Accelerating the commercialisation of the 5G IoT markets
Altron Arrow Editor's Choice Telecoms, Datacoms, Wireless, IoT
Fibocom unveils Non-Terrestrial Networks (NTN) module MA510-GL, enabling satellite and cellular connectivity to IoT applications.

Read more...

Long-range connectivity module
Avnet Silica Telecoms, Datacoms, Wireless, IoT
Digi XBee XR 868 RF Modules support the deployment of long-range connectivity applications, and support point-to-point and mesh networking protocols.

Read more...

4G LTE-M/NB-IoT connectivity reference design
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Developed around the industry-leading Nordic nRF9160 module, the platform comes complete with a newly-developed LTE antenna, ATRIA, which is pre-certified to operate over the full LTE-M and NB-IoT bands.

Read more...

Antennas to meet all connectivity requirements
Electrocomp Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.

Read more...

Introducing SIMCom’s new A7673X series
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat 1 bis module that supports LTE-FDD, with a maximum downlink rate of 10 Mbps and an uplink rate of 5 Mbps.

Read more...

18 W monolithic microwave amplifier
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
The CHA8612-QDB is a two stage, high-power amplifier operating between 7,9 and 11 GHz. The monolithic microwave amplifier can typically provide 18 W of saturated output power and 40% of power-added efficiency.

Read more...

Categories

Telecoms, Datacoms, Wireless, IoT

Multiport modem cards

Further reading:

Publications by Technews