Wireless, mobile and compact UHF/VHF communication

16 May 2007 Telecoms, Datacoms, Wireless, IoT

UHF and VHF communication is something that Satel has been doing for more than two decades with a wide range of wireless modems to suit all applications. For example, the interface options (Figure 1) include serial RS232/422 and RS485, Ethernet RJ45, Profibus and Modbus, analog/digital I/O, and alarm signal.

The modem options (Figure 2) for the different Satelline 3AS types are: [d] - 1 W, 12,5/25 kHz, 160 Channels, H-D, 19200 bps; [Epic] - 10 W, 12,5/25 kHz, 160 Channels, H-D, 19200 bps; [VHF] - the same as 3AS[d] but in VHF format; [NMS] - same as 3AS[d], but with network management software; or the 3AS VHF with network management software. The type 1870 is 100 mW, 25 kHz, 74 Channels, half-duplex, 9600 bps.

These modems can be integrated into any existing system design and have high quality components to ensure reliable transmission success. Point-to-point and multipoint with diagnostics/monitoring capabilities are available. Power consumption is also low. The modems have factory settings to suit client requirements and they are ICASA approved. A licence-free type 869 MHz is available as well as a 3-in-1 unit with TX, RX and repeater all in one.

For more information contact Errol Mann, Integrate & Autom8, +27 (0)861 AUTOM8.

Further reading:

RF filters explained
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
As RF environments become increasingly crowded, RF filters play a critical role in maintaining signal quality, improving system performance, and ensuring reliable operation.

Read more...

---

GigaDevice expands optical communication portfolio
NuVision Electronics Telecoms, Datacoms, Wireless, IoT
GigaDevice has introduced the new GD32E512 and GD32E252 series MCUs specifically designed for optical module applications.

Read more...

---

Industrial connectivity without compromise
Telecoms, Datacoms, Wireless, IoT
The IR315 combines 4G LTE, Wi-Fi, Ethernet, and VPN technologies into a rugged, industrial-grade platform that enables seamless connectivity across a wide range of applications.

Read more...

---

Module provides 4G LTE Cat 1 bis connectivity
Dizzy Enterprises Telecoms, Datacoms, Wireless, IoT
Mikroe adds 4G LTE Cat 1 bis connectivity where reliable data transmission and low power consumption are critical with the GC02S1-EU2 module.

Read more...

---

Enabling next-generation FPGA and SDR innovation
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
Puzhi Electronic Technology has established itself as a dynamic provider of advanced ARM and FPGA-based solutions, delivering a comprehensive ecosystem of products designed for modern embedded and high-performance computing applications.

Read more...

---

Magnetic mount antenna takes the hassle out of 4G installations
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Designed for fast, tool-free installation, the YECN022CA 4G magnetic mount whip monopole antenna gives wireless devices a dependable cellular link in the field, where installation time and signal reliability both matters.

Read more...

---

Engineering for failure: why resilient telemetry matters more than perfect connectivity
Editor's Choice Telecoms, Datacoms, Wireless, IoT
One of the biggest assumptions in modern tracking systems is that connectivity will always be available. From an engineering perspective, this creates an interesting problem.

Read more...

---

Wi-Fi and Bluetooth smart module series integrates intelligence
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has expanded its smart module portfolio with the SH503FM, a new-generation series of Wi-Fi and Bluetooth smart modules.

Read more...

---

Powering smart sensor networks
CST Electronics Telecoms, Datacoms, Wireless, IoT
NeoCortec’s NeoMesh wireless mesh networking protocol and software stack is ideally suited for powering smart sensor networks where each device is required to send and receive small packets of data infrequently, but with high reliability.

Read more...

---

Lessons in long-distance telemetry
Omniflex Remote Monitoring Specialists Telecoms, Datacoms, Wireless, IoT
Ian Loudon, international sales and marketing manager at Omniflex, reflects on some of the key engineering lessons learned from decades of deploying wireless telemetry systems in demanding industrial applications.

Read more...

---