Power Electronics / Power Management


High-current regulators

11 May 2011 Power Electronics / Power Management

New from International Rectifier are the iP1837 and iP1827 iPowIR voltage regulators for point-of-load (POL) applications requiring high current. The devices integrate a control MOSFET, synchronous FETKY, bootstrap diode, bootstrap capacitor and internal over-current protection in a 7,7 x 7,7 mm LGA package.

The new devices feature true differential voltage sensing for precise regulation, ±0,5% accurate reference voltage over temperature, precision dead time trim to maximise efficiency, and body braking to optimise transient response. Additionally, the iP1837 and iP1827 are pin compatible for 25 A and 35 A applications, offer wide input voltage range of 1,5 V to 16 V, programmable frequency up to 1,5 MHz, 5 V bias or 3,3 V bias/single input, and are optimised for 12 V input operations and low output voltages.

The regulators are fully protected and feature thermally compensated internal hiccup over-current protection allowing flat current limit over temperature. Additional features include pre-bias startup, over-voltage protection, thermal shutdown, enable pin with voltage monitoring capability, power good output and programmable soft start.

For more information contact Marian Ledgerwood, Future Electronics, +27 (0)21 421 8292, [email protected], www.futureelectronics.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

High-efficiency buck-boost converter
Altron Arrow Power Electronics / Power Management
The MAX77859 is a high-efficiency, high-performance buck-boost converter targeted for systems requiring a wide input voltage range.

Read more...
Revolutionising data centre cooling with FUCHS LUBRICANTS
Power Electronics / Power Management
Traditional air-cooling systems, reliant on space, energy, and water, are no longer sustainable for hyperscale and co-location data centres

Read more...
Powerless is not an option
Power Electronics / Power Management
Uninterruptible Power Supply systems are critical for transitioning and emergency backup power for a short period, until an alternative power source can be established, or the initial power source is restored.

Read more...
Elevate your IoT development
Power Electronics / Power Management
Infineon’s XENSIV Sensor Shield is an evaluation board designed to elevate IoT development. Offering a robust array of sensors for precise data collection, this shield is a powerhouse of sensor technology.

Read more...
E-mobility innovation: balancing power, sensors, and connectivity
Future Electronics Manufacturing / Production Technology, Hardware & Services
The future of e-mobility is being shaped by innovations in power systems, connectivity, and sustainable design, and this article explores key technologies driving the industry forward.

Read more...
Full brick DC-DC converter range
Vepac Electronics Power Electronics / Power Management
Featuring a fixed switching frequency and predictable EMI, these DC-DC converters from PowerGood have an output up to 960 W.

Read more...
18 to 44 GHz downconverter module
RFiber Solutions Power Electronics / Power Management
The connectorised module includes RF preselector filters, low-noise amplifiers, programmable attenuation, LO synthesizer, power conditioning, and FPGA control.

Read more...
Smart and secure way to power IT
RS South Africa Power Electronics / Power Management
Delivering more output, security, and control than other devices in its class, Eaton’s new 5P Gen 2 UPS also enables fleet management, remote UPS setting, and remote firmware upgrades.

Read more...
Wine farm turns to solar installation for power
Current Automation Power Electronics / Power Management
Slanghoek Wine farm opted into a power purchase agreement to lower overall electricity costs and enter a true sustainable future, with a price-competitive edge on lower running costs.

Read more...
Industrial PSU family
Brabek Power Electronics / Power Management
The RACPRO1 family of PSUs supports a universal DC input voltage range from 430 to 850 V DC, allowing the parts to support renewable energy and microgrid applications.

Read more...