Plug-and-play wireless Internet solution

Telecoms, Datacoms, Wireless, IoT

Microwave semiconductor & tube suppliers

Radio system suppliers

RF module & subsystem suppliers

Telephony IC suppliers

Wireless system IC/module suppliers

printer friendly version

29 January 2003 Telecoms, Datacoms, Wireless, IoT

The iConnector is a wireless Internet adapter from Connect One that enables any device to access the Internet with a minimum of time, effort and cost. It provides a broad range of Internet services as it mediates the connection between the host device and the Internet. It also relieves the manufacturer of the necessity to incur the cost and risks of a major hardware redesign and rewrite of the application.

The Internet engine inside iConnector is iChip, Connect One's field-proven solution that has been deployed in more than 40 countries and working today with hundreds of ISPs all over the world. As an off-the-shelf solution, the iConnector eliminates the need for the customer to develop his own Internet connectivity solution. Only a few commands are needed to add the full Internet protocol stack and device configuration parameters to the host application.

The iConnector is a compact adapter, measuring 43 x 69 x 20 mm and as such is ideal for installation on mobile products or in remote locations. Various versions of iConnector are available: models for DTE-DCE or DCE-DCE configuration; one that takes power from an external power supply and one that is powered by host device via pin 9 of the host DB-9 connector; and units for either industrial or commercial temperature ranges.

Share this article:

SIMCom’s A7673x series
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat.1 bis module based on the ASR1606 chipset, that supports wireless communication modes of LTE-FDD, with a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps.

Read more...

Accelerating the commercialisation of the 5G IoT markets
Altron Arrow Editor's Choice Telecoms, Datacoms, Wireless, IoT
Fibocom unveils Non-Terrestrial Networks (NTN) module MA510-GL, enabling satellite and cellular connectivity to IoT applications.

Read more...

Long-range connectivity module
Avnet Silica Telecoms, Datacoms, Wireless, IoT
Digi XBee XR 868 RF Modules support the deployment of long-range connectivity applications, and support point-to-point and mesh networking protocols.

Read more...

4G LTE-M/NB-IoT connectivity reference design
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Developed around the industry-leading Nordic nRF9160 module, the platform comes complete with a newly-developed LTE antenna, ATRIA, which is pre-certified to operate over the full LTE-M and NB-IoT bands.

Read more...

Antennas to meet all connectivity requirements
Electrocomp Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.

Read more...

Introducing SIMCom’s new A7673X series
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat 1 bis module that supports LTE-FDD, with a maximum downlink rate of 10 Mbps and an uplink rate of 5 Mbps.

Read more...

18 W monolithic microwave amplifier
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
The CHA8612-QDB is a two stage, high-power amplifier operating between 7,9 and 11 GHz. The monolithic microwave amplifier can typically provide 18 W of saturated output power and 40% of power-added efficiency.

Read more...

Categories

Telecoms, Datacoms, Wireless, IoT

Plug-and-play wireless Internet solution

Further reading:

Publications by Technews