The SGM621B is a high accuracy, high voltage instrumentation amplifier, which is designed to set any gain from 1 to 10 000 with one external resistor. The device works well in battery-powered applications due to the low power consumption of 1,3 mA typical quiescent current. The SGM621B provides SOIC-8, MSOP-8 and TDFN-3×3-8L packages, which are much smaller than discrete classical op-amp circuits.
The SGM621B provides 120 ppm (MAX) non-linearity and 150 μV (MAX) low input offset voltage. The device also features low noise, low bias current, and low power. The combination of these characteristics makes it a good choice for applications requiring excellent DC performance.
The SGM621B offers 6 nV/√Hz 300 fA/√Hz low input voltage noise, input current noise at 1 kHz, and 0,4 μVP-P in the 0,1 to 10 Hz band, making it suitable for pre-amplifier applications. The 10 μs settling time to 0,01% makes SGM621B appropriate for multiplexed applications.
The SGM621B has an extended operating temperature range of -40 to 125°C.
Understanding two key tools for cleaner serial data Altron Arrow
Editor's Choice Analogue, Mixed Signal, LSI
Understanding how pre-emphasis and equalisation works, and when to use one over the other, is critical when designing reliable high-speed systems.
Read more...Battery-friendly Thread and BLE solution iCorp Technologies
DSP, Micros & Memory
Positioned as an incremental upgrade to the ESP32-H2, Espressif’s ESP32-H21 adds an integrated DC-DC converter that reduces active current draw and helps extend battery life in power-sensitive consumer and industrial devices.
Read more...DC-DC converters for next-generation IoT iCorp Technologies
Power Electronics / Power Management
AIPUPOWER’s K78XXJT-500R3 and K78XXJT-500R3-LB give designers a compact, high-efficiency power option for battery-powered and space-constrained systems, combining up to 96% efficiency with no-load input current as low as 0,2 mA.
Read more...Compact edge platform for AI iCorp Technologies
AI & ML
Built around the Qualcomm QCS6490 octa-core SoC, Quectel’s QuecPi Alpha delivers up to 12 TOPS of on-device AI performance.
Read more...Low-power SoC for IoT designs iCorp Technologies
DSP, Micros & Memory
Espressif’s ESP32-H4 is a dual-core 32-bit RISC-V SoC designed for battery-powered wireless products that require low energy consumption, strong security, and modern connectivity.
Read more...NVDC power-path control to 1– 6 cell battery systems iCorp Technologies
Power Electronics / Power Management
SG Micro’s SGM41581 is an I2C-controlled narrow voltage direct charging buck boost charge controller designed to simplify robust power delivery in systems that must seamlessly operate from an adapter input or a battery pack.
Read more...Wi-Fi 7 tri-band connectivity module iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Quectel has introduced the FCE870Q, a compact short range wireless connectivity module designed for next generation IoT devices that require high throughput, low latency, and reliable operation in dense wireless environments.
Read more...Lower-power Thread and BLE connectivity iCorp Technologies
DSP, Micros & Memory
Espressif has released the ESP32-H21, a low-power wireless SoC aimed at Thread, Matter, Zigbee, and Bluetooth LE device designs.
Read more...Enabling the next generation of high-performance wireless designs iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Espressif Systems has expanded its wireless connectivity portfolio with the introduction of the ESP32-E22, a high-performance connectivity co-processor designed for next generation embedded and IoT systems.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version