Switches, Relays & Keypads


8-pole reed switch module

20 March 2013 Switches, Relays & Keypads

Meder has replaced its RM05-8A 8-pole reed relay module with a new version having a 25% smaller footprint. At only 33 x 6,95 x 14,05 mm, the RM05-8-S is equipped with eight internal reed switches and new-generation integrated drivers eliminating the need for external activation electronics.

Its smaller size and standardised dual-in-line pin out configuration make it highly suitable for a broader range of smaller applications in the test and measurement, telecommunications and high-frequency markets. Moreover, the RM05-8-S is designed with gold plated leads for improved solderability.

A single relay module can be used individually or several RM modules can be interconnected in parallel to increase the overall storage capacity of input signal bits. The relay reaches a rated power of up to 10 W with a maximum switching voltage of maximum 170 V d.c. and a switching current up to 0,5 A.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Next-gen Wi Fi 6E connectivity for embedded systems
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Espressif Systems has expanded its connectivity portfolio with the introduction of the ESP32-E22, the company’s first Wi-Fi 6E connectivity co-processor.

Read more...
Rugged railway-grade DC-DC power modules
iCorp Technologies Power Electronics / Power Management
iCorp Technologies has introduced the AIPUPOWER ZCD100 and ZCD150 Series, a family of rugged DC-DC converters designed to meet the demanding electrical and environmental requirements of railway and transportation systems.

Read more...
Quectel redefines connectivity with RG660Qx 5G Series
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Purpose-built to meet the demands of next-generation IoT and wireless broadband, these modules leverage the cutting-edge Qualcomm X85 and X82 5G Modem-RF systems to deliver enterprise-grade performance.

Read more...
Quectel’s RG255C-NA and RM255C-GL accelerate 5G RedCap adoption
iCorp Technologies Editor's Choice Telecoms, Datacoms, Wireless, IoT
Quectel’s RG255C-NA and RM255C-GL modules represent a strategic move into this fast-growing segment, delivering Sub-6 GHz 5G connectivity optimised for mid-tier IoT applications.

Read more...
Powering next-gen IoT connectivity
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
The FGMC63N tri-band MCU Wi-Fi 6E module from Quectel addresses offers integrated connectivity across 2,4 GHz, 5 GHz, and 6 GHz bands in a compact, highly optimised design.

Read more...
Non-isolated, regulated DC-DC module
iCorp Technologies Power Electronics / Power Management
AIPUPOWER’s K7805M-3000 is a compact switching regulator module delivering a regulated 5 V output at up to 3 A, intended for common DC buses used in industrial and mobile platforms.

Read more...
Quectel introduces tri-band MCU Wi-Fi 6E module
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Supporting operation across the 2,4 GHz, 5 GHz, and 6 GHz bands, the FGMC63N delivers true tri-band capability in a compact, integrated design.

Read more...
High-performance Wi-Fi and Bluetooth module
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
The FCU741R is a high-performance Wi-Fi 4 module launched by Quectel, supporting 2,4 and 5 GHz frequencies which can be used for WLAN connection.

Read more...
High-performance MCU with mesh communication
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
The KGM133S is a high-performance by Quectel that boasts an ARM Cortex-M33 processor with a frequency of up to 78 MHz, and Matter, Thread, Zigbee, BLE 6.0, and BLE mesh.

Read more...
LED indicators
Brabek Switches, Relays & Keypads
The Dual Icon series from APEM is an LED indicator that presents two distinct visual signals within a single unit.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved