Interconnection


Latest Articles

New coding system for DIN 41612
31 July 2002, Actum Electronics
Inevitably, when a control panel goes up in flames due to an expensive PCB card being inserted into the wrong socket the call goes out for coding. Unfortunately a coding system for DIN 41612 connectors ...

Read more...
Modular interface connector systems
31 July 2002, Actum Electronics
IDC connectors are either bonded to ribbon cable or to round flat cable. A requirement arose for a more rational simplified processing technique for normal round cables in communication and information ...

Read more...
Network performance may suffer as a result of installation issues raised by Category 6
17 July 2002
The new Category 6 cabling standard could present IT managers with a major containment problem in buildings where smaller diameter cables were originally specified, according to Molex Premise Networks. ...

Read more...
Type-C pressfit connector uses more economical flat press-in tool
17 July 2002, Actum Electronics
For backplanes press-in technology is state of the art. Another application area for male press-fit connectors is single or double-sided SMT printed circuit boards. For these applications Erni has improved ...

Read more...
Multichannel circular optical connectors
17 July 2002, DS Communications
Litton Veam's FRBOF series of circular multichannel optical connectors have quarter turn bayonet coupling and use the same bodies and accessories of the company's reliable CIR series. They are available ...

Read more...
Low profile DIN 41612 connectors
17 July 2002, Actum Electronics
Using Erni's new, low-profile (10,1 mm) F series connectors, designers of backplanes and bus systems are now able to use both series F and C connectors on the same DIN 41494 system/s. The advantages of ...

Read more...
Transform an RJ cordset into a connector for harsh environments
3 July 2002
One of the remaining problems with Ethernet is that if one wants to guarantee the performance, one still must use the RJ45 (Category 5e) connection line in order to avoid interferences and data loss. ...

Read more...
Connectors with 250 pins on 2 mm raster
3 July 2002, Actum Electronics
High-speed applications for telecommunications and ATM systems require high contact densities with corresponding capacity. Erni has noted these requirements and has consistently expanded its successful ...

Read more...
Intelligent cable management system provides a complete solution
3 July 2002
Structured cabling manufacturer, Molex Premise Networks, has launched a Category 6 version of its 'realtime' patching system. This 'intelligent' connectivity system provides IT managers with the ability ...

Read more...
CompactPCI connectors for computer technology
3 July 2002, Actum Electronics
The Enterprise Computer Telephony Forum (ECTF) has specified the implementation of the Compact PCI computer telephony bus with the H.110 standard that allows the design of computer telephony hardware ...

Read more...
High current contacts for mixed DIN 41612 connectors
3 July 2002, Actum Electronics
Erni offers its Type M (mixed) DIN 41612 connectors that may be fitted with 2, 4, 6, 8 or 10 special contacts and thus are suited for many different applications in the telecom and data transmission fields. Male ...

Read more...
Dual stack VHDCI connector saves space
19 June 2002
The 0,80 mm dual stack Ultra+ VHDCI (very high density cable interface) connectors from Molex for next generation SCSI applications have been designed to meet ANSI/SFF-8441 and SPI-4 requirements while ...

Read more...
Time-saving direct termination for polymer fibres
5 June 2002, Phoenix Contact
A fibre-optic printed circuit terminal block from Phoenix Contact makes connector preassembly superfluous and guarantees fast and simple direct termination. The FOPT 2.2 provides a high-quality alternative ...

Read more...
ERmetTen (8+2) 2 mm pitch connectors
22 May 2002, Actum Electronics
Erni expanded its metric (2,0 mm grid) connector series with a new connector family in order to meet the increasing demand for higher density backplanes as well as daughter and plug-in boards. The 10 ...

Read more...
Miniature sealed connector system
22 May 2002
Joining Bulgin's renowned family of 'Buccaneer' sealed plastic connectors, the new 400 Series is the smallest in the range with an overall diameter of just over 19 mm. Like others in the family, it offers ...

Read more...
Flat flexible conductors
8 May 2002, Sivan Electronic Supplies
Panta-jumpers are highly flexible flat conductor connectors combining the properties of flat cables and connector pins. They can be used as soldered connection cables and/ or quick-connect connectors. ...

Read more...
Shielded 41612 connectors
8 May 2002, Actum Electronics
Secure transmission of information on data highways requires special security measures, because today more and more high performance data transmission at high speeds is required. Designed for these requirements ...

Read more...
Fibre-optic/hybrid assemblies
8 May 2002
An expanding range of hybrid connectors from Fischer enables dedicated or mixtures of high performance coaxial, fibre-optic and signal connections. Fluid and gas connections are also available within ...

Read more...
Ultra-high temperature dip test sockets
24 April 2002, Sivan Electronic Supplies
Aries Electronics has introduced ultra-high temperature DIP test sockets for 350°C and 500°C applications. Featuring a high temperature ceramic body and high conductivity stainless steel contacts, the ...

Read more...
Environmentally-friendly and safe coaxial cable family
24 April 2002
With immediate effect, users can switch from fluorine-containing coaxial cables to a new, halogen-free and environmentally-friendly cable family. Enviroflex is a new halogen-free product family from Huber+Suhner ...

Read more...



<< First   < Previous   Page 103 of 112   Next >   Last >>







While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved